Hi, I finally got them to boot GNU/linux using Grub after setting FLASH=Secondary.
But this need to be done after every cold boot... I hope this could help... Laurent comBIOS ver. 1.33c 20080626 Copyright (C) 2000-2008 Soekris Engineering. net5501 0512 Mbyte Memory CPU Geode LX 500 Mhz Pri Mas ELITE PRO CF CARD 4GB LBA Xlt 971-128-63 3915 Mbyte Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int ------------------------------------------------------------------- 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 1 Seconds to automatic boot. Press Ctrl-P for entering Monitor. GRUB Loading stage1.5. GRUB loading, please wait... Error 25 Pri Mas ELITE PRO CF CARD 4GB LBA Xlt 971-128-63 3915 Mbyte Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int ------------------------------------------------------------------- 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 comBIOS Monitor. Press ? for help. > ? comBIOS Monitor Commands boot [drive][:partition] INT19 Boot reboot cold boot download download a file using XMODEM/CRC flashupdate update flash BIOS with downloaded file time [HH:MM:SS] show or set time date [YYYY/MM/DD] show or set date d[b|w|d] [adr] dump memory bytes/words/dwords e[b|w|d] adr value [...] enter bytes/words/dwords i[b|w|d] port input from 8/16/32-bit port o[b|w|d] port value output to 8/16/32-bit port run adr execute code at adr cmosread [adr] read CMOS RAM data cmoswrite adr byte [...] write CMOS RAM data cmoschecksum update CMOS RAM Checksum set parameter=value set system parameter to value show [parameter] show one or all system parameters ?/help show this help > show ConSpeed = 19200 ConLock = Enabled ConMute = Disabled BIOSentry = Enabled PCIROMS = Enabled PXEBoot = Disabled FLASH = Primary BootDelay = 1 FastBoot = Disabled BootPartition = Disabled BootDrive = 80 81 F0 FF ShowPCI = Enabled Reset = Hard CpuSpeed = Default > FLASH=Secondary > reboot
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
