I'm seeing an odd issue with the net5501 board. When I connect a
wireless device to the mini-pci slot, the usb device is not assigned an
interrupt. I'm using Linux with the 2.6.26.8 kernel. I'm trying to
determine if this is a kernel config issue or a hardware issue.
pbx ~ # cat /proc/interrupts
CPU0
0: 90 XT-PIC-XT timer
1: 0 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
4: 186 XT-PIC-XT serial
7: 118425 XT-PIC-XT mfgpt-timer
8: 0 XT-PIC-XT rtc
11: 920 XT-PIC-XT eth0
14: 34960 XT-PIC-XT ide0
NMI: 0 Non-maskable interrupts
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
Along with this message:
ehci_hcd 0000:00:15.1: request interrupt 7 failed
ohci_hcd 0000:00:15.0: request interrupt 7 failed
If I remove the mini-pci card, this is what I'm seeing:
pbx ~ # cat /proc/interrupts
CPU0
0: 90 XT-PIC-XT timer
1: 0 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
4: 182 XT-PIC-XT serial
7: 39423 XT-PIC-XT mfgpt-timer
8: 0 XT-PIC-XT rtc
11: 293 XT-PIC-XT eth0
14: 18618 XT-PIC-XT ide0
15: 0 XT-PIC-XT ehci_hcd:usb1, ohci_hcd:usb2
NMI: 0 Non-maskable interrupts
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
Same exact system.
Thanks,
Darrick
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
