Hi , I am using Mikrotik Routerboard 14 (PCI to 4 miniPCI adapter) on a net5501 board running voyage (2.6.23 kernel) linux . I use an Atheros-based miniPCI wireless adapter (Mikrotik R52 ) driven by madwifi. Though my wireless card is getting detected, I could not associate with an essid or change the channel of operation. Nor am I able to assign an IP address. Please find the series of commands that I typed and the corresponding output:
$ wlanconfig ath3 create wlandev wifi0 wlanmode adhoc ath1 $ ifconfig ath1 down $ iwpriv ath1 mode 1 $ifconfig ath1 up wifi1: ath_chan_set: unable to reset channel 1 (2412 MHz) flags 0xc0 'Hardware didn't respond as expected' ) wifi1: ath_chan_set: unable to reset channel 52 (5260 MHz) flags 0x140 'Hardware didn't respond as expected) wifi1: ath_chan_set: unable to reset channel 60 (5300 MHz) flags 0x140 'Hardware didn't respond as expected) wifi1: ath_chan_set: unable to reset channel 2 (2417 MHz) flags 0xc0 'Hardware didn't respond as expected' ) wifi1: ath_chan_set: unable to reset channel 149 (5745 MHz) flags 0x140 'Hardware didn't respond as expected) wifi1: rx FIFO overrun; resetting wifi1: ath_reset: unable to reset hardware: 'Hardware didn't respond as expected' (HAL status 3) However, router board works well on a Desktop machine running ubuntu (kernel 2.6.29). Please let me know if anything need to be done to get Routerboard 14 working on my machine. Thanks -- SHAILENDRA SINGH _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
