On Sun, Jun 14, 2009 at 10:15:59PM +0000, Stuart Henderson wrote: > On 2009-06-10, Alex Samad <[email protected]> wrote: > > > > Is any one else using a tdm410 in one of these boxes ? How are you > > getting the power to the card for the FXS ports. I have noticed, just > > behind the molex connector pins P8 and digum talk about a pwr2400b which > > is a PCI face plate that connects to the cards some how !!!, I am > > thinking it is via these 2 pins, but I can't tell which is +ve and which > > is -ve or even if I am right. > > Have you tried asking Digium?
yep, found some other people who have soldered to the pins on the bottom of the card - which I have now done > > > Soekres might be time to expand the size of the box a little bit :) > > I've got a whole stack of cards which *just* don't fit the 5501 case. > quad NICs, fibre NICs, SCSI controllers, ... another 5mm or so would make > all the difference. Your preaching to the converted :) I would go over the top and say 10mm My current problem though is I am getting a lot of missed interrupts, I use 6to4 addressing and it sometimes gets in a dead loop - because my adsl drops and it makes the digium card stop working :( > > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > -- Imagine if every Thursday your shoes exploded if you tied them the usual way. This happens to us all the time with computers, and nobody thinks of complaining. -- Jeff Raskin
signature.asc
Description: Digital signature
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
