Well, I'm running 7, so maybe something is different. I haven't tried updating to 8 yet; I'll probably just wait the almost 20 hours it takes to compile the sources since I have a HDD in it when I do. But, when I did the PXE boot to do my install on a 5501 it worked for me.
The loader use to default to 9600 bps, I'm not sure if that is still the default or not. So, you might try setting the bios to 9600 and try again with term set at that as well. -George N3GQF -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Scott Newell Sent: Thursday, January 21, 2010 10:12 PM To: [email protected] Subject: Re: [Soekris] Corrupt console during FreeBSD 8 PXEBOOT At 09:05 PM 1/21/2010, George Fazio wrote: >I use PuTTY on a Windows machine with the term type set to xterm. The Had to update PuTTY; didn't realize the newer ones supported serial ports. That's pretty handy, thanks! >escape codes, etc. are the boot menu. If you just hit enter, or press 1 (or >4 for single user) it should continue to load normally. Nope, still getting the corruption. Remember, I'm trying to install, and I don't even know if the kernel is getting loaded yet or not. -- newell N5TNL _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
