On Wed, 27 Jan 2010 20:24:03 +0100, Joel Dahl <[email protected]> wrote:
>So, is anyone running a Soekris 5501 with a SSD disk? I'm looking at buying a >couple of 5501's and equip them with Intel X25-M disks, so if anyone have any >experience with this type of configuration I'd be interested to hear your >thoughts. Any problems I should be aware of? I'll probably run FreeBSD as the >OS, if that matters... I'm running a 5501 with an OCZ Vertex. Works fine. A couple things to keep in mind... I haven't used it yet, but OCZ has a firmware version that does garbage collection when the drive is idle which negates the need for TRIM support. Don't get an SSD thinking you're going to get speed. The 5501 will limit the throughput well below what you'd expect for an SSD. I find that mine moves about 30MB/s IIRC. That may seem slow, but someone rightly pointed out to me that it's still faster than the network interface and since this is a network server after all it's just fine. What you do get out of an SSD in a Soekris is low power, low heat, no moving parts, and no noise. That's exactly what I wanted out of mine so I'm perfectly happy with the speed limitations. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
