On Wed, 10 Mar 2010, Tarek Kilani wrote: > Hi People, > I'm new to this community and to mailing lists, so if there is something > that I missed let me know. > I have used the nice tutorial of > http://webfolder.wirelessleiden.nl/www.ultradesic.com/index98e4.html?section=45 > where I have reached to the part where I enter "boot f0", and I get: > > NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 > > Copyright (C) 2002, 2003 National Semiconductor Corporation > All rights reserved. > > Pre-boot eXecution Environment PXE-2.0 (build 082) > Copyright (C) 1997-2000 Intel Corporation > > > CLIENT MAC ADDR: 00 00 24 C3 5E 50 > CLIENT IP: 192.168.1.4 MASK: 255.255.255.0 DHCP IP: 192.168.1.10 > > ==========================END=================== > This is where i have reached and from here there is nothing. I see that > the pxeboot is being transfered, but that is it. > Any recommendations? > I have made some screenshots of the configuration of tftp32.
My first guess is that you don't have your DHCP server configured correctly with the "next-server" and "filename" options. What does your syslog report about the DHCP requests? -- Matt It's not what I know that counts. It's what I can remember in time to use. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
