I have a big problem with the driver natsemi in eth4 and eth5
The eht4 and 5 is running for 3- 4 day and after the system is crash. In dmesg i find before the crash system this line eth4: increased tx threshold, txcfg 0xd0f01004. eth5: increased tx threshold, txcfg 0xd0f01006. After 2 3 hours the system is crash, I using debian with kernel 2.6.26-2-486 Kan you help me Thenks Ivan This is my dmesg dmesg |grep eth5 natsemi eth5: NatSemi DP8381[56] at 0xa4001000 (0000:01:01.0), 00:00:24:cd:1f:89, IRQ 7, port TP. eth5: DSPCFG accepted after 0 usec. eth5: link up. eth5: Setting full-duplex based on negotiated link capability. eth5: no IPv6 routers present eth5: remaining active for wake-on-lan eth5: DSPCFG accepted after 0 usec. eth5: link up. eth5: Setting full-duplex based on negotiated link capability. eth5: no IPv6 routers present eth4: increased tx threshold, txcfg 0xd0f01004. eth5: increased tx threshold, txcfg 0xd0f01006. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
