Hi, On 8 Apr 2011, at 11:17, [email protected] wrote:
> With my Soekris net4801 i try to boot from a 2GB Flash with the 1.33 BIOS > setup as: > > ConSpeed = 19200 > ConLock = Enabled > ConMute = Disabled > BIOSentry = Enabled > PCIROMS = Enabled > PXEBoot = Enabled > FLASH = Secondary You need FLASH = Primary, or ... > BootDelay = 5 > FastBoot = Disabled > BootPartition = Disabled > BootDrive = 80 81 F0 FF ... if you want to keep flash as secondary, set BootDrive = 81 80 F0 FF > ShowPCI = Enabled > Reset = Hard > CpuSpeed = Default > > but the boot ofshow: > > Booting 'Metrix' > > root (hd1,0) > Filesystem type unknown, partition type 0x83 > kernel /boot/vmlinuz-2.6.16-metrix root=/dev/hdb1 console=ttyS0,9600n8 > > Error 17: Cannot mount selected partition > > Press any key to continue... > > Someone has worked with a Soekris net4801 booting from CF ? What parameters > in the BIOS > let the Soekris boot directly fron the CF ? I try various combinations > without success. > > Regards > -- > Luciano Rinetti > mail > [email protected] > > Mob. 335.7878.602 > > Movimatica S.r.l. > > www.movimatica.com - [email protected] > > _________________________________________ > sede Operativa: > C.so Svizzera, 185 - 10149 Torino - Italy > Tel. +39 011 7767694 - Fax +39 011 746179 > _________________________________________ > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech -- Bob Bishop +44 (0)118 940 1243 [email protected] fax +44 (0)118 940 1295 mobile +44 (0)783 626 4518 _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
