root@debian:~# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-35squeeze2) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:51:05 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000f0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000 [ 0.000000] RAMDISK: 2f805000 - 3003f61a [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) [ 0.000000] 140MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00009000 - 0000fe80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014ccbd4] TEXT DATA BSS ==> [0001000000 - 00014ccbd4] [ 0.000000] #4 [002f805000 - 003003f61a] RAMDISK ==> [002f805000 - 003003f61a] [ 0.000000] #5 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #6 [00014cd000 - 00014d3000] BRK ==> [00014cd000 - 00014d3000] [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00fe100] fe100 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x00040000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] On node 0 totalpages: 262046 [ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d4000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3966 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 281 pages used for memmap [ 0.000000] HighMem zone: 35561 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: checksum error! [ 0.000000] BIOS bug, MP table errors detected!... [ 0.000000] ... disabling SMP support. (tell your hw vendor) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u4194304 [ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259997 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=4f588d6a-54c8-45a1-9150-b198c346ce70 ro console=ttyS0,19200 earlyprint=serial,ttyS0,19200 quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:00040000) [ 0.000000] Memory: 1025352k/1048576k available (2503k kernel code, 22468k reserved, 1329k data, 380k init, 143368k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB) [ 0.000000] .data : 0xc1271d79 - 0xc13be480 (1329 kB) [ 0.000000] .text : 0xc1000000 - 0xc1271d79 (2503 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 999.909 MHz processor. [ 0.008012] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.81 BogoMIPS (lpj=3999636) [ 0.008088] Security Framework initialized [ 0.008106] SELinux: Disabled at boot. [ 0.008141] Mount-cache hash table entries: 512 [ 0.012301] Initializing cgroup subsys ns [ 0.012320] Initializing cgroup subsys cpuacct [ 0.012342] Initializing cgroup subsys devices [ 0.012356] Initializing cgroup subsys freezer [ 0.012369] Initializing cgroup subsys net_cls [ 0.012457] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.012473] CPU: L2 cache: 512K [ 0.012486] CPU: Unsupported number of siblings 2 [ 0.012501] mce: CPU supports 5 MCE banks [ 0.012525] Disabling lock debugging due to kernel taint [ 0.012550] CPU0: Thermal monitoring enabled (TM1) [ 0.012567] using mwait in idle threads. [ 0.012590] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.012621] ... version: 3 [ 0.012632] ... bit width: 40 [ 0.012642] ... generic registers: 2 [ 0.012653] ... value mask: 000000ffffffffff [ 0.012665] ... max period: 000000007fffffff [ 0.012676] ... fixed-purpose events: 3 [ 0.012687] ... event mask: 0000000700000003 [ 0.012705] Checking 'hlt' instruction... OK. [ 0.029054] SMP alternatives: switching to UP code [ 0.040607] Freeing SMP alternatives: 13k freed [ 0.040804] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.040818] weird, boot CPU (#0) not listed by the BIOS. [ 0.040827] SMP motherboard not detected. [ 0.148033] SMP disabled [ 0.148447] Brought up 1 CPUs [ 0.148463] Total of 1 processors activated (1999.81 BogoMIPS). [ 0.148502] CPU0 attaching NULL sched-domain. [ 0.148936] devtmpfs: initialized [ 0.150944] regulator: core version 0.5 [ 0.151184] NET: Registered protocol family 16 [ 0.152189] PCI: PCI BIOS revision 2.01 entry at 0xfac61, last bus=13 [ 0.152203] PCI: Using configuration type 1 for base access [ 0.154157] bio: create slab <bio-0> at 0 [ 0.154438] ACPI: Interpreter disabled. [ 0.154661] vgaarb: loaded [ 0.154940] PCI: Probing PCI hardware [ 0.154954] PCI: Probing PCI hardware (bus 00) [ 0.155430] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold [ 0.155450] pci 0000:00:17.0: PME# disabled [ 0.155603] pci 0000:00:18.0: PME# supported from D0 D3hot D3cold [ 0.155622] pci 0000:00:18.0: PME# disabled [ 0.155773] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.155791] pci 0000:00:19.0: PME# disabled [ 0.155943] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.155961] pci 0000:00:1a.0: PME# disabled [ 0.156287] pci 0000:01:00.0: reg 38 32bit mmio pref: [0x000000-0x00ffff] [ 0.156368] pci 0000:01:00.0: supports D1 [ 0.156382] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.156401] pci 0000:01:00.0: PME# disabled [ 0.164163] pci 0000:00:17.0: bridge io port: [0x1000-0x1fff] [ 0.164185] pci 0000:00:17.0: bridge 32bit mmio: [0xa0000000-0xa0ffffff] [ 0.164338] pci 0000:02:00.0: reg 14 32bit mmio: [0xa0000000-0xa00007ff] [ 0.164421] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x98000000-0x9801ffff] [ 0.164629] pci 0000:02:00.1: reg 10 io port: [0x00-0x1f] [ 0.164659] pci 0000:02:00.1: reg 14 32bit mmio: [0x000000-0x0001ff] [ 0.164807] pci 0000:02:00.1: PME# supported from D0 [ 0.164827] pci 0000:02:00.1: PME# disabled [ 0.164975] pci 0000:02:00.2: reg 14 32bit mmio: [0xa0000800-0xa000083f] [ 0.165124] pci 0000:02:00.2: PME# supported from D0 [ 0.165143] pci 0000:02:00.2: PME# disabled [ 0.165319] pci 0000:02:02.0: reg 10 32bit mmio: [0xa0000900-0xa00009ff] [ 0.165481] pci 0000:02:02.0: PME# supported from D0 D3hot [ 0.165500] pci 0000:02:02.0: PME# disabled [ 0.165636] pci 0000:02:02.1: reg 10 32bit mmio: [0xa0000a00-0xa0000aff] [ 0.165797] pci 0000:02:02.1: PME# supported from D0 D3hot [ 0.165817] pci 0000:02:02.1: PME# disabled [ 0.165952] pci 0000:02:02.2: reg 10 32bit mmio: [0xa0000b00-0xa0000bff] [ 0.166113] pci 0000:02:02.2: PME# supported from D0 D3hot [ 0.166133] pci 0000:02:02.2: PME# disabled [ 0.166295] pci 0000:02:02.3: reg 10 32bit mmio: [0xa0000c00-0xa0000cff] [ 0.166469] pci 0000:02:02.3: PME# supported from D0 D3hot [ 0.166489] pci 0000:02:02.3: PME# disabled [ 0.166643] pci 0000:02:02.4: reg 14 32bit mmio: [0xa0002000-0xa0003fff] [ 0.166792] pci 0000:02:02.4: PME# supported from D0 [ 0.166811] pci 0000:02:02.4: PME# disabled [ 0.166981] pci 0000:02:04.0: reg 10 32bit mmio: [0x000000-0x0001ff] [ 0.167262] pci 0000:02:04.1: reg 10 32bit mmio: [0x000000-0x0001ff] [ 0.167659] pci 0000:02:06.0: reg 20 io port: [0x1000-0x101f] [ 0.167690] pci 0000:02:06.0: reg 24 32bit mmio: [0xa0004000-0xa00043ff] [ 0.167721] pci 0000:02:06.0: reg 30 32bit mmio pref: [0x98000000-0x9801ffff] [ 0.167969] pci 0000:02:08.0: reg 10 32bit mmio: [0xa0004400-0xa00044ff] [ 0.168148] pci 0000:02:08.0: PME# supported from D0 D3hot [ 0.168168] pci 0000:02:08.0: PME# disabled [ 0.168306] pci 0000:02:08.1: reg 10 32bit mmio: [0xa0004500-0xa00045ff] [ 0.168467] pci 0000:02:08.1: PME# supported from D0 D3hot [ 0.168487] pci 0000:02:08.1: PME# disabled [ 0.168622] pci 0000:02:08.2: reg 10 32bit mmio: [0xa0004600-0xa00046ff] [ 0.168784] pci 0000:02:08.2: PME# supported from D0 D3hot [ 0.168803] pci 0000:02:08.2: PME# disabled [ 0.168965] pci 0000:02:08.3: reg 10 32bit mmio: [0xa0004700-0xa00047ff] [ 0.169140] pci 0000:02:08.3: PME# supported from D0 D3hot [ 0.169159] pci 0000:02:08.3: PME# disabled [ 0.169373] pci 0000:02:0a.0: reg 14 32bit mmio: [0x000000-0x0000ff] [ 0.169662] pci 0000:02:0a.1: reg 10 io port: [0x1020-0x1027] [ 0.169693] pci 0000:02:0a.1: reg 14 32bit mmio: [0xa0004800-0xa000480f] [ 0.169841] pci 0000:02:0a.1: PME# supported from D0 [ 0.169860] pci 0000:02:0a.1: PME# disabled [ 0.169995] pci 0000:02:0a.2: reg 10 io port: [0x1028-0x102f] [ 0.170026] pci 0000:02:0a.2: reg 14 32bit mmio: [0xa0004810-0xa000481f] [ 0.170296] pci 0000:02:0a.3: reg 10 io port: [0x00-0x07] [ 0.170326] pci 0000:02:0a.3: reg 14 32bit mmio: [0x000000-0x00000f] [ 0.170595] pci 0000:02:0a.4: reg 10 io port: [0x00-0x07] [ 0.170624] pci 0000:02:0a.4: reg 14 32bit mmio: [0x000000-0x00000f] [ 0.170963] pci 0000:02:0c.0: reg 14 32bit mmio: [0x000000-0x0000ff] [ 0.171264] pci 0000:02:0c.1: reg 14 32bit mmio: [0x000000-0x00001f] [ 0.171553] pci 0000:02:0c.2: reg 14 32bit mmio: [0xa0004900-0xa00049ff] [ 0.171836] pci 0000:02:0c.3: reg 14 32bit mmio: [0xa0004a00-0xa0004bff] [ 0.172140] pci 0000:02:0c.4: reg 14 32bit mmio: [0x000000-0x0000ff] [ 0.172445] pci 0000:01:00.0: bridge io port: [0x1000-0x1fff] [ 0.172467] pci 0000:01:00.0: bridge 32bit mmio: [0xa0000000-0xa0ffffff] [ 0.172680] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.172700] pci 0000:03:00.0: PME# disabled [ 0.180149] pci 0000:00:18.0: bridge io port: [0x2000-0x3fff] [ 0.180170] pci 0000:00:18.0: bridge 32bit mmio: [0xa1000000-0xa2ffffff] [ 0.180361] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 0.180381] pci 0000:04:02.0: PME# disabled [ 0.180573] pci 0000:04:03.0: PME# supported from D0 D3hot D3cold [ 0.180592] pci 0000:04:03.0: PME# disabled [ 0.180796] pci 0000:04:04.0: PME# supported from D0 D3hot D3cold [ 0.180815] pci 0000:04:04.0: PME# disabled [ 0.180981] pci 0000:03:00.0: bridge io port: [0x2000-0x3fff] [ 0.181003] pci 0000:03:00.0: bridge 32bit mmio: [0xa1000000-0xa2ffffff] [ 0.181158] pci 0000:05:00.0: reg 10 32bit mmio: [0xa1000000-0xa101ffff] [ 0.181208] pci 0000:05:00.0: reg 18 io port: [0x2000-0x201f] [ 0.181241] pci 0000:05:00.0: reg 1c 32bit mmio: [0xa1020000-0xa1023fff] [ 0.181402] pci 0000:05:00.0: PME# supported from D0 D3hot [ 0.181423] pci 0000:05:00.0: PME# disabled [ 0.181822] pci 0000:04:02.0: bridge io port: [0x2000-0x2fff] [ 0.181843] pci 0000:04:02.0: bridge 32bit mmio: [0xa1000000-0xa1ffffff] [ 0.182012] pci 0000:06:00.0: reg 10 32bit mmio: [0xa2000000-0xa201ffff] [ 0.182062] pci 0000:06:00.0: reg 18 io port: [0x3000-0x301f] [ 0.182096] pci 0000:06:00.0: reg 1c 32bit mmio: [0xa2020000-0xa2023fff] [ 0.182257] pci 0000:06:00.0: PME# supported from D0 D3hot [ 0.182278] pci 0000:06:00.0: PME# disabled [ 0.182675] pci 0000:04:03.0: bridge io port: [0x3000-0x3fff] [ 0.182697] pci 0000:04:03.0: bridge 32bit mmio: [0xa2000000-0xa2ffffff] [ 0.183083] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.183103] pci 0000:08:00.0: PME# disabled [ 0.188147] pci 0000:00:19.0: bridge io port: [0x4000-0x5fff] [ 0.188168] pci 0000:00:19.0: bridge 32bit mmio: [0xa3000000-0xa4ffffff] [ 0.188359] pci 0000:09:02.0: PME# supported from D0 D3hot D3cold [ 0.188379] pci 0000:09:02.0: PME# disabled [ 0.188571] pci 0000:09:03.0: PME# supported from D0 D3hot D3cold [ 0.188591] pci 0000:09:03.0: PME# disabled [ 0.188794] pci 0000:09:04.0: PME# supported from D0 D3hot D3cold [ 0.188813] pci 0000:09:04.0: PME# disabled [ 0.188979] pci 0000:08:00.0: bridge io port: [0x4000-0x5fff] [ 0.189000] pci 0000:08:00.0: bridge 32bit mmio: [0xa3000000-0xa4ffffff] [ 0.189156] pci 0000:0a:00.0: reg 10 32bit mmio: [0xa3000000-0xa301ffff] [ 0.189206] pci 0000:0a:00.0: reg 18 io port: [0x4000-0x401f] [ 0.189239] pci 0000:0a:00.0: reg 1c 32bit mmio: [0xa3020000-0xa3023fff] [ 0.189401] pci 0000:0a:00.0: PME# supported from D0 D3hot [ 0.189422] pci 0000:0a:00.0: PME# disabled [ 0.189820] pci 0000:09:02.0: bridge io port: [0x4000-0x4fff] [ 0.189841] pci 0000:09:02.0: bridge 32bit mmio: [0xa3000000-0xa3ffffff] [ 0.190010] pci 0000:0b:00.0: reg 10 32bit mmio: [0xa4000000-0xa401ffff] [ 0.190060] pci 0000:0b:00.0: reg 18 io port: [0x5000-0x501f] [ 0.190094] pci 0000:0b:00.0: reg 1c 32bit mmio: [0xa4020000-0xa4023fff] [ 0.190255] pci 0000:0b:00.0: PME# supported from D0 D3hot [ 0.190276] pci 0000:0b:00.0: PME# disabled [ 0.190674] pci 0000:09:03.0: bridge io port: [0x5000-0x5fff] [ 0.190695] pci 0000:09:03.0: bridge 32bit mmio: [0xa4000000-0xa4ffffff] [ 0.199079] Switching to clocksource tsc [ 0.201580] pnp: PnP ACPI: disabled [ 0.201597] PnPBIOS: Scanning system for PnP BIOS support... [ 0.201823] PnPBIOS: PnP BIOS support was not detected. [ 0.202914] pci 0000:02:00.0: BAR 6: no parent found for of device [0x98000000-0x9801ffff] [ 0.252436] pci 0000:02:06.0: BAR 6: no parent found for of device [0x98000000-0x9801ffff] [ 0.302312] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.302332] pci 0000:01:00.0: IO window: 0x1000-0x1fff [ 0.302356] pci 0000:01:00.0: MEM window: 0xa0000000-0xa0ffffff [ 0.302378] pci 0000:01:00.0: PREFETCH window: 0x40000000-0x400fffff [ 0.302405] pci 0000:00:17.0: PCI bridge, secondary bus 0000:01 [ 0.302422] pci 0000:00:17.0: IO window: 0x1000-0x1fff [ 0.302443] pci 0000:00:17.0: MEM window: 0xa0000000-0xa0ffffff [ 0.302463] pci 0000:00:17.0: PREFETCH window: 0x40000000-0x401fffff [ 0.302490] pci 0000:04:02.0: PCI bridge, secondary bus 0000:05 [ 0.302508] pci 0000:04:02.0: IO window: 0x2000-0x2fff [ 0.302531] pci 0000:04:02.0: MEM window: 0xa1000000-0xa1ffffff [ 0.302549] pci 0000:04:02.0: PREFETCH window: disabled [ 0.302576] pci 0000:04:03.0: PCI bridge, secondary bus 0000:06 [ 0.302593] pci 0000:04:03.0: IO window: 0x3000-0x3fff [ 0.302616] pci 0000:04:03.0: MEM window: 0xa2000000-0xa2ffffff [ 0.302634] pci 0000:04:03.0: PREFETCH window: disabled [ 0.302660] pci 0000:04:04.0: PCI bridge, secondary bus 0000:07 [ 0.302672] pci 0000:04:04.0: IO window: disabled [ 0.302692] pci 0000:04:04.0: MEM window: disabled [ 0.302710] pci 0000:04:04.0: PREFETCH window: disabled [ 0.302735] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 0.302753] pci 0000:03:00.0: IO window: 0x2000-0x3fff [ 0.302776] pci 0000:03:00.0: MEM window: 0xa1000000-0xa2ffffff [ 0.302794] pci 0000:03:00.0: PREFETCH window: disabled [ 0.302819] pci 0000:00:18.0: PCI bridge, secondary bus 0000:03 [ 0.302836] pci 0000:00:18.0: IO window: 0x2000-0x3fff [ 0.302857] pci 0000:00:18.0: MEM window: 0xa1000000-0xa2ffffff [ 0.302874] pci 0000:00:18.0: PREFETCH window: disabled [ 0.302901] pci 0000:09:02.0: PCI bridge, secondary bus 0000:0a [ 0.302918] pci 0000:09:02.0: IO window: 0x4000-0x4fff [ 0.302941] pci 0000:09:02.0: MEM window: 0xa3000000-0xa3ffffff [ 0.302959] pci 0000:09:02.0: PREFETCH window: disabled [ 0.302986] pci 0000:09:03.0: PCI bridge, secondary bus 0000:0b [ 0.303003] pci 0000:09:03.0: IO window: 0x5000-0x5fff [ 0.303026] pci 0000:09:03.0: MEM window: 0xa4000000-0xa4ffffff [ 0.303044] pci 0000:09:03.0: PREFETCH window: disabled [ 0.303070] pci 0000:09:04.0: PCI bridge, secondary bus 0000:0c [ 0.303082] pci 0000:09:04.0: IO window: disabled [ 0.303102] pci 0000:09:04.0: MEM window: disabled [ 0.303119] pci 0000:09:04.0: PREFETCH window: disabled [ 0.303145] pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 [ 0.303162] pci 0000:08:00.0: IO window: 0x4000-0x5fff [ 0.303185] pci 0000:08:00.0: MEM window: 0xa3000000-0xa4ffffff [ 0.303203] pci 0000:08:00.0: PREFETCH window: disabled [ 0.303229] pci 0000:00:19.0: PCI bridge, secondary bus 0000:08 [ 0.303245] pci 0000:00:19.0: IO window: 0x4000-0x5fff [ 0.303266] pci 0000:00:19.0: MEM window: 0xa3000000-0xa4ffffff [ 0.303283] pci 0000:00:19.0: PREFETCH window: disabled [ 0.303306] pci 0000:00:1a.0: PCI bridge, secondary bus 0000:0d [ 0.303318] pci 0000:00:1a.0: IO window: disabled [ 0.303336] pci 0000:00:1a.0: MEM window: disabled [ 0.303352] pci 0000:00:1a.0: PREFETCH window: disabled [ 0.303401] pci 0000:00:17.0: setting latency timer to 64 [ 0.303448] pci 0000:01:00.0: setting latency timer to 64 [ 0.303485] pci 0000:00:18.0: setting latency timer to 64 [ 0.303526] pci 0000:03:00.0: setting latency timer to 64 [ 0.303563] pci 0000:04:02.0: setting latency timer to 64 [ 0.303601] pci 0000:04:03.0: setting latency timer to 64 [ 0.303639] pci 0000:04:04.0: setting latency timer to 64 [ 0.303674] pci 0000:00:19.0: setting latency timer to 64 [ 0.303714] pci 0000:08:00.0: setting latency timer to 64 [ 0.303752] pci 0000:09:02.0: setting latency timer to 64 [ 0.303790] pci 0000:09:03.0: setting latency timer to 64 [ 0.303827] pci 0000:09:04.0: setting latency timer to 64 [ 0.303863] pci 0000:00:1a.0: setting latency timer to 64 [ 0.303883] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.303900] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.303917] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff] [ 0.303934] pci_bus 0000:01: resource 1 mem: [0xa0000000-0xa0ffffff] [ 0.303951] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x401fffff] [ 0.303969] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.303985] pci_bus 0000:02: resource 1 mem: [0xa0000000-0xa0ffffff] [ 0.304003] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x400fffff] [ 0.304022] pci_bus 0000:03: resource 0 io: [0x2000-0x3fff] [ 0.304038] pci_bus 0000:03: resource 1 mem: [0xa1000000-0xa2ffffff] [ 0.304055] pci_bus 0000:04: resource 0 io: [0x2000-0x3fff] [ 0.304072] pci_bus 0000:04: resource 1 mem: [0xa1000000-0xa2ffffff] [ 0.304089] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff] [ 0.304106] pci_bus 0000:05: resource 1 mem: [0xa1000000-0xa1ffffff] [ 0.304123] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff] [ 0.304140] pci_bus 0000:06: resource 1 mem: [0xa2000000-0xa2ffffff] [ 0.304158] pci_bus 0000:08: resource 0 io: [0x4000-0x5fff] [ 0.304174] pci_bus 0000:08: resource 1 mem: [0xa3000000-0xa4ffffff] [ 0.304191] pci_bus 0000:09: resource 0 io: [0x4000-0x5fff] [ 0.304208] pci_bus 0000:09: resource 1 mem: [0xa3000000-0xa4ffffff] [ 0.304225] pci_bus 0000:0a: resource 0 io: [0x4000-0x4fff] [ 0.304242] pci_bus 0000:0a: resource 1 mem: [0xa3000000-0xa3ffffff] [ 0.304259] pci_bus 0000:0b: resource 0 io: [0x5000-0x5fff] [ 0.304276] pci_bus 0000:0b: resource 1 mem: [0xa4000000-0xa4ffffff] [ 0.304430] NET: Registered protocol family 2 [ 0.304917] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.306496] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.309103] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.310288] TCP: Hash tables configured (established 131072 bind 65536) [ 0.310303] TCP reno registered [ 0.310691] NET: Registered protocol family 1 [ 0.311421] Unpacking initramfs... [ 1.384481] Freeing initrd memory: 8425k freed [ 1.397818] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.398869] audit: initializing netlink socket (disabled) [ 1.398915] type=2000 audit(1316089519.396:1): initialized [ 1.414330] highmem bounce pool size: 64 pages [ 1.414357] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.422681] VFS: Disk quotas dquot_6.5.2 [ 1.422978] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.423353] msgmni has been set to 1739 [ 1.424268] alg: No test for stdrng (krng) [ 1.424548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.424566] io scheduler noop registered [ 1.424577] io scheduler anticipatory registered [ 1.424589] io scheduler deadline registered [ 1.424811] io scheduler cfq registered (default) [ 1.425551] pcieport 0000:00:17.0: setting latency timer to 64 [ 1.425803] pcieport 0000:00:18.0: setting latency timer to 64 [ 1.426037] pcieport 0000:00:19.0: setting latency timer to 64 [ 1.426268] pcieport 0000:00:1a.0: setting latency timer to 64 [ 1.426751] pcieport 0000:04:02.0: irq 16 for MSI/MSI-X [ 1.426784] pcieport 0000:04:02.0: setting latency timer to 64 [ 1.426982] pcieport 0000:04:03.0: irq 17 for MSI/MSI-X [ 1.427014] pcieport 0000:04:03.0: setting latency timer to 64 [ 1.427208] pcieport 0000:04:04.0: irq 18 for MSI/MSI-X [ 1.427241] pcieport 0000:04:04.0: setting latency timer to 64 [ 1.427530] pcieport 0000:09:02.0: irq 19 for MSI/MSI-X [ 1.427561] pcieport 0000:09:02.0: setting latency timer to 64 [ 1.427756] pcieport 0000:09:03.0: irq 20 for MSI/MSI-X [ 1.427787] pcieport 0000:09:03.0: setting latency timer to 64 [ 1.427981] pcieport 0000:09:04.0: irq 21 for MSI/MSI-X [ 1.428012] pcieport 0000:09:04.0: setting latency timer to 64 [ 1.428509] isapnp: Scanning for PnP cards... [ 1.784462] isapnp: No Plug & Play device found [ 1.792327] Linux agpgart interface v0.103 [ 1.793175] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.793401] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a TI16750 [ 1.794537] 0000:02:0a.1: ttyS1 at I/O 0x1020 (irq = 9) is a 16550A [ 1.795004] 0000:02:0a.2: ttyS2 at I/O 0x1028 (irq = 9) is a 16550A [ 1.795203] serial 0000:02:0a.3: enabling device (0000 -> 0003) [ 1.795231] serial 0000:02:0a.3: can't find IRQ for PCI INT B; please try using pci=biosirq [ 1.795508] 0000:02:0a.3: ttyS3 at I/O 0x1030 (irq = 0) is a 16550A [ 1.795707] serial 0000:02:0a.4: enabling device (0000 -> 0003) [ 1.795733] serial 0000:02:0a.4: can't find IRQ for PCI INT B; please try using pci=biosirq [ 1.795754] Couldn't register serial port 0000:02:0a.4: -28 [ 1.796181] PNP: No PS/2 controller found. Probing ports directly. [ 1.797103] i8042.c: No controller found. [ 1.821281] mice: PS/2 mouse device common for all mice [ 1.821611] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.821668] rtc0: alarms up to one day, 114 bytes nvram [ 1.821712] cpuidle: using governor ladder [ 1.821725] cpuidle: using governor menu [ 1.821746] No iBFT detected. [ 1.823794] TCP cubic registered [ 1.824593] NET: Registered protocol family 10 [ 1.828937] Mobile IPv6 [ 1.828955] NET: Registered protocol family 17 [ 1.829047] Using IPI No-Shortcut mode [ 1.829443] PM: Resume from disk failed. [ 1.829492] registered taskstats version 1 [ 1.832446] rtc_cmos rtc_cmos: setting system clock to 2011-09-15 12:25:20 UTC (1316089520) [ 1.832735] Initalizing network drop monitor service [ 1.832837] Freeing unused kernel memory: 380k freed [ 1.833482] Write protecting the kernel text: 2504k [ 1.833578] Write protecting the kernel read-only data: 924k [ 1.833766] spurious 8259A interrupt: IRQ7. [ 1.921425] udev[44]: starting version 164 [ 2.646244] usbcore: registered new interface driver usbfs [ 2.647108] usbcore: registered new interface driver hub [ 2.648002] usbcore: registered new device driver usb [ 2.670686] SCSI subsystem initialized [ 2.695903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.696078] ehci_hcd 0000:02:02.3: setting latency timer to 64 [ 2.696098] ehci_hcd 0000:02:02.3: EHCI Host Controller [ 2.696202] ehci_hcd 0000:02:02.3: new USB bus registered, assigned bus number 1 [ 2.712734] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 2.712752] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 2.712977] e1000e 0000:05:00.0: setting latency timer to 64 [ 2.713405] e1000e 0000:05:00.0: irq 22 for MSI/MSI-X [ 2.713424] e1000e 0000:05:00.0: irq 23 for MSI/MSI-X [ 2.713440] e1000e 0000:05:00.0: irq 24 for MSI/MSI-X [ 2.721873] ehci_hcd 0000:02:02.3: cache line size of 32 is not supported [ 2.721921] ehci_hcd 0000:02:02.3: irq 9, io mem 0xa0000c00 [ 2.722129] sdhci: Secure Digital Host Controller Interface driver [ 2.722141] sdhci: Copyright(c) Pierre Ossman [ 2.837486] ehci_hcd 0000:02:02.3: USB 2.0 started, EHCI 1.00 [ 2.837596] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.837614] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.837629] usb usb1: Product: EHCI Host Controller [ 2.837642] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 2.837656] usb usb1: SerialNumber: 0000:02:02.3 [ 2.838085] usb usb1: configuration #1 chosen from 1 choice [ 2.838281] hub 1-0:1.0: USB hub found [ 2.838323] hub 1-0:1.0: 3 ports detected [ 2.838648] ehci_hcd 0000:02:08.3: setting latency timer to 64 [ 2.838667] ehci_hcd 0000:02:08.3: EHCI Host Controller [ 2.838717] ehci_hcd 0000:02:08.3: new USB bus registered, assigned bus number 2 [ 2.853888] libata version 3.00 loaded. [ 2.881519] ehci_hcd 0000:02:08.3: cache line size of 32 is not supported [ 2.881565] ehci_hcd 0000:02:08.3: irq 10, io mem 0xa0004700 [ 2.893143] ehci_hcd 0000:02:08.3: USB 2.0 started, EHCI 1.00 [ 2.893246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.893264] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.893280] usb usb2: Product: EHCI Host Controller [ 2.893293] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 2.893306] usb usb2: SerialNumber: 0000:02:08.3 [ 2.893953] usb usb2: configuration #1 chosen from 1 choice [ 2.894337] hub 2-0:1.0: USB hub found [ 2.894381] hub 2-0:1.0: 3 ports detected [ 2.894679] sdhci-pci 0000:02:04.0: SDHCI controller found [8086:8809] (rev 1) [ 2.894723] sdhci-pci 0000:02:04.0: enabling device (0000 -> 0002) [ 2.894750] sdhci-pci 0000:02:04.0: can't find IRQ for PCI INT C; please try using pci=biosirq [ 2.894768] sdhci-pci 0000:02:04.0: Invalid iomem size. You may experience problems. [ 2.988590] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.988742] sdhci-pci 0000:02:04.0: setting latency timer to 64 [ 2.988814] sdhci-pci: probe of 0000:02:04.0 failed with error -16 [ 2.988877] ahci 0000:02:06.0: version 3.0 [ 2.989046] ahci 0000:02:06.0: irq 25 for MSI/MSI-X [ 2.989196] ahci: SSS flag set, parallel bus scan disabled [ 2.989295] ahci 0000:02:06.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.989319] ahci 0000:02:06.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 2.989342] ahci 0000:02:06.0: setting latency timer to 64 [ 2.994711] scsi0 : ahci [ 2.999177] 0000:05:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:00:24:ce:45:74 [ 2.999197] 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 2.999299] 0000:05:00.0: eth0: MAC: 3, PHY: 8, PBA No: ffffff-0ff [ 2.999361] scsi1 : ahci [ 2.999646] ata1: SATA max UDMA/133 abar m1024@0xa0004000 port 0xa0004100 irq 25 [ 2.999667] ata2: SATA max UDMA/133 abar m1024@0xa0004000 port 0xa0004180 irq 25 [ 3.000539] ohci_hcd 0000:02:02.0: setting latency timer to 64 [ 3.000560] ohci_hcd 0000:02:02.0: OHCI Host Controller [ 3.000619] ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 3 [ 3.000693] ohci_hcd 0000:02:02.0: irq 9, io mem 0xa0000900 [ 3.001695] e1000e 0000:06:00.0: setting latency timer to 64 [ 3.002093] e1000e 0000:06:00.0: irq 26 for MSI/MSI-X [ 3.002112] e1000e 0000:06:00.0: irq 27 for MSI/MSI-X [ 3.002128] e1000e 0000:06:00.0: irq 28 for MSI/MSI-X [ 3.063146] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.063166] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.063182] usb usb3: Product: OHCI Host Controller [ 3.063195] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.063209] usb usb3: SerialNumber: 0000:02:02.0 [ 3.063906] usb usb3: configuration #1 chosen from 1 choice [ 3.064291] hub 3-0:1.0: USB hub found [ 3.064339] hub 3-0:1.0: 1 port detected [ 3.064599] sdhci-pci 0000:02:04.1: SDHCI controller found [8086:880a] (rev 1) [ 3.064643] sdhci-pci 0000:02:04.1: enabling device (0000 -> 0002) [ 3.064670] sdhci-pci 0000:02:04.1: can't find IRQ for PCI INT C; please try using pci=biosirq [ 3.064688] sdhci-pci 0000:02:04.1: Invalid iomem size. You may experience problems. [ 3.112645] sdhci-pci 0000:02:04.1: setting latency timer to 64 [ 3.112714] sdhci-pci: probe of 0000:02:04.1 failed with error -16 [ 3.112857] ohci_hcd 0000:02:02.1: setting latency timer to 64 [ 3.112876] ohci_hcd 0000:02:02.1: OHCI Host Controller [ 3.112930] ohci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 4 [ 3.112995] ohci_hcd 0000:02:02.1: irq 9, io mem 0xa0000a00 [ 3.171692] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.171713] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.171729] usb usb4: Product: OHCI Host Controller [ 3.171742] usb usb4: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.171756] usb usb4: SerialNumber: 0000:02:02.1 [ 3.177265] usb usb4: configuration #1 chosen from 1 choice [ 3.177738] hub 4-0:1.0: USB hub found [ 3.177795] hub 4-0:1.0: 1 port detected [ 3.178125] ohci_hcd 0000:02:02.2: setting latency timer to 64 [ 3.178144] ohci_hcd 0000:02:02.2: OHCI Host Controller [ 3.178195] ohci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 5 [ 3.178261] ohci_hcd 0000:02:02.2: irq 9, io mem 0xa0000b00 [ 3.179215] 0000:06:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:00:24:ce:45:75 [ 3.179233] 0000:06:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 3.179335] 0000:06:00.0: eth1: MAC: 3, PHY: 8, PBA No: ffffff-0ff [ 3.179489] e1000e 0000:0a:00.0: setting latency timer to 64 [ 3.179892] e1000e 0000:0a:00.0: irq 29 for MSI/MSI-X [ 3.179911] e1000e 0000:0a:00.0: irq 30 for MSI/MSI-X [ 3.179927] e1000e 0000:0a:00.0: irq 31 for MSI/MSI-X [ 3.243158] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.243177] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.243193] usb usb5: Product: OHCI Host Controller [ 3.243207] usb usb5: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.243220] usb usb5: SerialNumber: 0000:02:02.2 [ 3.243899] usb usb5: configuration #1 chosen from 1 choice [ 3.244277] hub 5-0:1.0: USB hub found [ 3.244325] hub 5-0:1.0: 1 port detected [ 3.244649] ohci_hcd 0000:02:08.0: setting latency timer to 64 [ 3.244668] ohci_hcd 0000:02:08.0: OHCI Host Controller [ 3.244730] ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 6 [ 3.244794] ohci_hcd 0000:02:08.0: irq 10, io mem 0xa0004400 [ 3.306956] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.306976] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.306991] usb usb6: Product: OHCI Host Controller [ 3.307005] usb usb6: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.307018] usb usb6: SerialNumber: 0000:02:08.0 [ 3.307681] usb usb6: configuration #1 chosen from 1 choice [ 3.308067] hub 6-0:1.0: USB hub found [ 3.308113] hub 6-0:1.0: 1 port detected [ 3.308428] ohci_hcd 0000:02:08.1: setting latency timer to 64 [ 3.308447] ohci_hcd 0000:02:08.1: OHCI Host Controller [ 3.308497] ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 7 [ 3.308562] ohci_hcd 0000:02:08.1: irq 10, io mem 0xa0004500 [ 3.314724] 0000:0a:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:00:24:ce:45:76 [ 3.314743] 0000:0a:00.0: eth2: Intel(R) PRO/1000 Network Connection [ 3.314846] 0000:0a:00.0: eth2: MAC: 3, PHY: 8, PBA No: ffffff-0ff [ 3.315004] e1000e 0000:0b:00.0: setting latency timer to 64 [ 3.315426] e1000e 0000:0b:00.0: irq 32 for MSI/MSI-X [ 3.315444] e1000e 0000:0b:00.0: irq 33 for MSI/MSI-X [ 3.315461] e1000e 0000:0b:00.0: irq 34 for MSI/MSI-X [ 3.341172] Clocksource tsc unstable (delta = 84044510 ns) [ 3.341361] Switching to clocksource jiffies [ 3.365653] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.365672] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.365688] usb usb7: Product: OHCI Host Controller [ 3.365701] usb usb7: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.365715] usb usb7: SerialNumber: 0000:02:08.1 [ 3.366429] usb usb7: configuration #1 chosen from 1 choice [ 3.366812] hub 7-0:1.0: USB hub found [ 3.366859] hub 7-0:1.0: 1 port detected [ 3.367175] ohci_hcd 0000:02:08.2: setting latency timer to 64 [ 3.367194] ohci_hcd 0000:02:08.2: OHCI Host Controller [ 3.367245] ohci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 8 [ 3.367312] ohci_hcd 0000:02:08.2: irq 10, io mem 0xa0004600 [ 3.426289] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.426308] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.426324] usb usb8: Product: OHCI Host Controller [ 3.426337] usb usb8: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 3.426350] usb usb8: SerialNumber: 0000:02:08.2 [ 3.427043] usb usb8: configuration #1 chosen from 1 choice [ 3.427429] hub 8-0:1.0: USB hub found [ 3.427477] hub 8-0:1.0: 1 port detected [ 3.442463] 0000:0b:00.0: eth3: (PCI Express:2.5GB/s:Width x1) 00:00:24:ce:45:77 [ 3.442483] 0000:0b:00.0: eth3: Intel(R) PRO/1000 Network Connection [ 3.442586] 0000:0b:00.0: eth3: MAC: 3, PHY: 8, PBA No: ffffff-0ff [ 3.530428] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.542486] ata1.00: ATA-8: KS-S12-S50, , max UDMA/133 [ 3.542508] ata1.00: 97696368 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.552546] ata1.00: configured for UDMA/133 [ 3.566016] scsi 0:0:0:0: Direct-Access ATA KS-S12-S50 n/a PQ: 0 ANSI: 5 [ 3.885567] ata2: SATA link down (SStatus 0 SControl 300) [ 3.958890] sd 0:0:0:0: [sda] 97696368 512-byte logical blocks: (50.0 GB/46.5 GiB) [ 3.959281] sd 0:0:0:0: [sda] Write Protect is off [ 3.959302] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.959470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.960356] sda: sda1 sda2 < sda5 > [ 3.964953] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.112589] PM: Starting manual resume from disk [ 4.112609] PM: Resume from partition 8:5 [ 4.112619] PM: Checking hibernation image. [ 4.112762] PM: Error -22 checking image file [ 4.112762] PM: Resume from disk failed. [ 4.207001] kjournald starting. Commit interval 5 seconds [ 4.207001] EXT3-fs: mounted filesystem with ordered data mode. [ 4.604100] udev[221]: starting version 164 [ 4.953097] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 4.953559] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.020005] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.128901] Error: Driver 'pcspkr' is already registered, aborting... [ 6.338829] Adding 2024148k swap on /dev/sda5. Priority:-1 extents:1 across:2024148k SS [ 6.439269] EXT3 FS on sda1, internal journal [ 6.623600] loop: module loaded [ 7.311779] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.010659] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9.010679] 0000:05:00.0: eth0: 10/100 speed: disabling TSO [ 9.011783] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.789542] eth0: no IPv6 routers present _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
[Soekris] net6501 - Linux 2.6.32-5-686
Wim Vandeputte Mailing list only Thu, 15 Sep 2011 05:44:35 -0700
