Hi Jim & List, Jim Pingle wrote: > Hacking away on the net6501 and have it running pfSense. On the earlier > models there was a bit of support in the FreeBSD kernel to drive the LED > inside of geode.c > > Has anyone managed to control the LEDs for the 6501 on FreeBSD yet? Any > ideas where they'd be accessed through? I figured I could copy and hack > up the old geode.c code to experiment a bit, but I'd like to confirm if > they are accessed the same way as they were previously. > > It looks like there is code to detect a few different BIOS variations > and it uses different offsets for each one. Rather than reinvent the > wheel I figured I'd ask first
on the net6501: Red Error LED: I/O port 069C bit 0, 0=off, 1=on. Green Ready LED: I/O port 069D bit 0, 0=off, 1=on. Info to be included on next release of manual. Best Regards, Soren Kristensen CEO & Chief Engineer Soekris Engineering, Inc. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
