No dice with that so far. I also tried a generic MC5725V that I have. In that case, I can get to the card in command mode, but it shows as being in low power mode. I issue at!pcstate=1, but that doesn't help. For the 5727, even re-plugging it doesn't help. The odd thing is that if I put the card into a USBSMA carrier (http://www.hwtools.net/Adapter/USBMA.html) and plug it into the USB port, then everything works fine.
at!pcinfo State: 0 (LPM) LPM force flags - W_DISABLE:0 User:0 Temp:0 Volt:1 W_DISABLE: 0 Poweroff enabled: 1 LPM Persistent: 0 -Jon ----- Original Message ----- From: "Denis Fondras" <[email protected]> To: [email protected] Sent: Tuesday, November 8, 2011 4:05:26 PM Subject: Re: [Soekris] Sierra Wireless MC5725 Won't Enumerate Le 08/11/2011 22:09, Jonathan C. Bailey a écrit : > > Since it's an embedded module and I'm not a Sierra Wireless reseller, do you have any suggestions as to how to obtain a newer firmware revision for the card? > I found the upgraded firmware for my model (MC5727) at HP support website. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
