Hello there, I've got an issue with a net6501.
I attached a SATA CF card adapter (Addonics). It's not seen by the BIOS at boot time so I can't boot of the CF card. What's strange is if I boot a linux kernel, through PXE for example, it detects the device and I'm able to mount it and perform regular read/write as usual. Moreover, the BIOS messages What's strange is that BIOS says "02 Ports, 01 Devices". So It seems to indicate the device is seen but not correctly detected. Logs : **** Linux (Booted through PXE) dmesg output : [ 279.910710] libata version 3.00 loaded. [ 279.937095] ahci 0000:02:06.0: version 3.0 [ 279.937159] pci 0000:01:00.0: using bridge 0000:00:17.0 INT B to get IRQ 17 [ 279.937176] ahci 0000:02:06.0: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 279.937310] ahci 0000:02:06.0: irq 42 for MSI/MSI-X [ 279.937388] ahci: SSS flag set, parallel bus scan disabled [ 279.937485] ahci 0000:02:06.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 279.937509] ahci 0000:02:06.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 279.937532] ahci 0000:02:06.0: setting latency timer to 64 [ 279.937996] scsi0 : ahci [ 279.939680] scsi1 : ahci [ 279.939936] ata1: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004500 irq 42 [ 279.939958] ata2: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004580 irq 42 [ 280.422297] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 280.422342] ata1.00: CFA: SanDisk SDCFH-008G, HDX 6.02, max UDMA/66 [ 280.422362] ata1.00: 15625216 sectors, multi 0: LBA48 [ 280.422424] ata1.00: applying bridge limits [ 280.422494] ata1.00: configured for UDMA/66 [ 280.438616] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH-00 HDX PQ: 0 ANSI: 5 [ 280.758318] ata2: SATA link down (SStatus 0 SControl 300) [ 280.812238] sd 0:0:0:0: [sda] 15625216 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 280.812561] sd 0:0:0:0: [sda] Write Protect is off [ 280.812582] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 280.812725] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 280.813816] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 280.827516] sd 0:0:0:0: [sda] Attached SCSI removable disk **** BIOS output : comBIOS ver. 1.40h 20111027 Copyright (C) 2000-2011 Soekris Engineering. net6501 2048 Mbyte Memory CPU Atom E6xx 1600 Mhz Initializing Intel(R) Boot Agent GE v1.3.72 PXE 2.1 Build 089 (WfM 2.0) SATA AHCI BIOS ver. 0.6 20110902 Copyright (C) 2003-2011 Intel Corporation Controller Bus#02, Device#06, Function#00: 02 Ports, 01 Devices Port-00: No device detected Port-01: No device detected No device found Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int -------------------------------------------------------------------- 00:00:0 8086 4114 06000005 0007 0000 00 00 00 00000000 00000000 00:23:0 8086 8184 06040000 0107 0010 08 00 01 1FFF1000 A0FFA000 10 00:24:0 8086 8185 06040000 0107 0010 08 00 01 3FFF2000 A2FFA100 11 00:25:0 8086 8180 06040000 0107 0010 08 00 01 5FFF4000 A4FFA300 05 00:26:0 8086 8181 06040000 0107 0010 08 00 01 0FFF1000 00FFA000 09 00:31:0 8086 8186 06010000 0003 0000 00 00 80 00000000 00000000 02:02:0 8086 8804 0C031001 0106 0010 00 00 80 A0000B00 00000000 09 02:02:1 8086 8805 0C031001 0106 0010 00 00 80 A0000C00 00000000 09 02:02:2 8086 8806 0C031001 0106 0010 00 00 80 A0000D00 00000000 09 02:02:3 8086 8807 0C032001 0106 0010 00 00 80 A0000E00 00000000 09 02:06:0 8086 880B 01060101 0107 0010 00 00 00 00000000 00000000 11 02:08:0 8086 880C 0C031001 0106 0010 00 00 80 A0004800 00000000 10 02:08:1 8086 880D 0C031001 0106 0010 00 00 80 A0004900 00000000 10 02:08:2 8086 880E 0C031001 0106 0010 00 00 80 A0004A00 00000000 10 02:08:3 8086 880F 0C032001 0106 0010 00 00 80 A0004B00 00000000 10 02:10:1 8086 8811 07000200 0107 0010 00 00 80 00001041 A0004D00 09 02:10:2 8086 8812 07000200 0107 0010 00 00 80 00001049 A0004D10 09 02:12:2 8086 8817 0C800000 0106 0010 00 00 80 00000000 A0005000 05 02:12:3 8086 8818 0C090000 0106 0010 00 00 80 00000000 A0005200 05 03:00:0 111D 803A 0604000E 0107 0010 08 00 01 3FFF2000 A2FFA100 05:00:0 8086 10D3 02000000 0107 0010 08 00 00 A1000000 00000000 09 06:00:0 8086 10D3 02000000 0107 0010 08 00 00 A2000000 00000000 10 08:00:0 111D 803A 0604000E 0107 0010 08 00 01 5FFF4000 A4FFA300 10:00:0 8086 10D3 02000000 0107 0010 08 00 00 A3000000 00000000 10 11:00:0 8086 10D3 02000000 0107 0010 08 00 00 A4000000 00000000 11 4 Seconds to automatic boot. Press Ctrl-P for entering Monitor. Intel(R) Boot Agent GE v1.3.72 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No Boot device available, enter monitor. comBIOS Monitor. Press ? for help. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
