Hi simon, [email protected] wrote: > Hello Soren, > > Many thanks for this update release. > > Soren Kristensen<[email protected]> wrote: >> It includes the new USB Boot code which should be able to boot all >> newer USB flash sticks, it currently support only high speed device >> (which all newer USB sticks are) do have support for hubs and multi >> lun devices like flash card readers, although we haven't tested >> that many yet. > > Tested several USB keys from old 512MB model to brand new 4GB one and > none booted. Flashed different kinds of images onto them > (partitionned, bootable ISO, ...) but didn't get any chance to see > any boot.
Info please, like screendump of comBIOS power up until boot fails., what software you're using, what USB devices (just the new ones), whatever might give me an idea what's going uon. Everything I have here could boot. >> Please note that the comBIOS just scan once for devices at >> powerup/reset, so some device slow to get ready might need a >> "reboot" in the comBIOS before getting recognized (have been >> observed with an USB to SATA converter). > > Soft rebooted several times and got the same results. > > >> The vers 1.41 also have various small and larger fixes, including >> correct BIOS MPtable with HT enabled and soft reboot issue fixed. > > BTW, my issue with the bios detection of my SATA CF card adapter (see > previous unreplied thread) is still there : the device is not > detected thus not bootable at bios level but seen and usable by a, > linux kernel (PXE booted) Can't do much about that, the AHCI SATA boot code is from Intel, I do have source access and changelog goes way back, so it should be well tested.... Best Regards, Soren Kristensen CEO & Chief Engineer Soekris Engineering, Inc. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
