Hi Eric, I really don´t know something about the smoothroadster-2.0.2 firewall, Perhaps you will post here on the list a link, to let the list members keeping an eye on this project? If you have something overseen, I mean.
But if this is a port, a fork or clone of the SmoothWall firewall project which can be found at <http://www.smoothwall.org/> the install forces an installed graphic adapter card, ok only for the install, but therefore you will need one. As I told first I don´t know something about the smoothroadster-2.0.2 firewall, but perhaps this will help you out. Like Karl Auerbach wrote some list members were also doing some tests before they get there favorite OS running glad on the box. As an example somewhere wrote that he was not able to install Debian Linux using a kernel under version 3.0.8, CentOS 6 was not going well, but the version 5 is running fine and so on, so you perhaps should also do some experiments to keep it running fine. -- Good luck and kind regards Frank > -----Original Message----- > From: [email protected] [mailto:soekris-tech- > [email protected]] On Behalf Of Eric F > Sent: Friday, March 09, 2012 2:32 PM > To: [email protected] > Subject: [Soekris] Impossible to boot on hard drive... Please help > > Hello, > > It's been two weeks since I've received my net6501-30 board, and since I haven't > managed to install smoothroadster-2.0.2, a firewall that is ready for COM port > communication. > After installation, it says "installation finished, reboot" > When I reboots, I have the message "GRUB Loading stage2..." then nothing else. Just > like if GRUB was not installed well. > > I've thought my net6501-30 board was damaged, so I've ordered another one. > Now it automatically boots on me USB key (the first board didn't) after searching the > PXE boot (the first one didn't too) So I think that my first board is damaged. > > I'm still stuck at "GRUB Loading stage2...", it's getting on my nerves. My 2.5" HDD is > Port-00: Hard Disk, FUJITSU MHZ2250BH G2. > May it not be compatible with net6501-30 ? > > Please help me, I do not know what to do :/ > > A last question : On the 2 boards I have, the "Ready" LED never goes on, is it normal ? > > I thank you very much for your help ! > > Eric __________ Hinweis von ESET NOD32 Antivirus, Signaturdatenbank-Version 6954 (20120309) __________ E-Mail wurde geprüft mit ESET NOD32 Antivirus. http://www.eset.com _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
