hellow, i am jamshaid , and i m trying to access astlinux from soekris net 5501. i have burned the image in cf card and made net5501 boot from it. initially it demanded for my BIOS update . which i succeed in doing after a lot of trying . then net5501 identified my cf card and start booting from it . after booting for the first time it ended at user login and password, i assumed that the installation is done so i switched it off. but on the next day when i switched it on again , although it start booting from cf card but it halts before reaching to end and gives me this kind of error.
NET: Registered protocol family 17 Using IPI Shortcut mode Clocksource tsc unstable (delta = 193959925 ns) Switching to clocksource pit ata1: link is slow to respond, please be patient (ready=0) ata1: SRST failed (errno=-16) lease be patient (ready=0) ata1: SRST failed (errno=-16) ata1: link is slow to respond, please be patient (ready=0) ata1: SRST failed (errno=-16) ata1: SRST failed (errno=-16) ata1: reset failed, giving up RAMDISK: gzip image found at block 0 VFS: Mounted root (ext2 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 296k freed AstLinux medium not found. /bin/sh: can't access tty; job control turned off # what can i do to make it run completely and access asterisk in it ?? regards, Jamshaid _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
