I have a net5501-70 which is running FreeBSD 8.3. It's got one internal SATA HD from which it boots, and also has a couple of external drives connected via a USB hub. No expansions cards are installed.
I attempted to update it to 9.1-RELEASE following the instructions here: http://www.freebsd.org/releases/9.1R/installation.html#AEN36 When I reboot into the 9.1 kernel, the boot process chokes with: Mounting from ufs:/dev/ufsid/49fabde14312a481 failed with error 19. When I ask for the list of available filessystems, I get: List of GEOM managed disk devices: ufsid/4dcbe318bd6838cd da1s1a da1s1 da1 ufsid/4edc3dd3db9a086c da0s1a da0s1 da0 The internal hard drive is notably absent from the list. I was expecting it to appear at ada1. Also absent is any mention of ada1 prior to the error. The Partition Metadata Integrity check mentioned in the release notes ( http://www.freebsd.org/releases/9.0R/relnotes-detailed.html#AEN1277 ) doesn't appear to the problem, as I'm not seeing the "GEOM_PART: Integrity check failed" message. I tried setting kern.geom.part.check_integrity=0 anyway, and it didn't make a difference. I'd appreciate any pointers folks can give on how to resolve this problem. I've attached logs, captured with "script tip sio0", of the machine booting unsuccessfully with 9.1 and successfully with 8.3. I edited out the ASCII menus and progress spinners, but everything after the Copyright lines is unaltered. Thank you. ~crh
POST: 012345689bcefghips1234ajklnopqr,,,tvwxy comBIOS ver. 1.33c 20080626 Copyright (C) 2000-2008 Soekris Engineering. net5501 CPU Geode LX 500 Mhz 0000 Mbyte Memory0512 Pri Sla WDC WD3200BEVT-00ZCT0 LBA Xlt 1024-255-63 134 Gbyte Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int ------------------------------------------------------------------- 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 Seconds to automatic boot. Press Ctrl-P for entering Monitor. 2 1 F1 FreeBSD Boot: F1 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RELEASE #0 r243826: Tue Dec 4 06:55:39 UTC 2012 r...@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 CPU: Geode(TM) Integrated Processor by AMD PCS (499.91-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x5a2 Family = 5 Model = a Stepping = 2 Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX> AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!> real memory = 536870912 (512 MB) avail memory = 501989376 (478 MB) kbd1 at kbdmux0 K6-family MTRR support enabled (2 registers) module_register_init: MOD_LOAD (vesa, 0xc0dc3570, 0) error 19 ctl: CAM Target Layer loaded ACPI Error: A valid RSDP was not found (20110527/tbxfroot-237) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. cryptosoft0: <software crypto> on motherboard pcib0 pcibus 0 on motherboard pci0: <PCI bus> on pcib0 glxsb0: <AMD Geode LX Security Block (AES-128-CBC, RNG)> mem 0xa0000000-0xa0003fff irq 10 at device 1.2 on pci0 vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0004000-0xa00040ff irq 11 at device 6.0 on pci0 vr0: Quirks: 0x2 vr0: Revision: 0x96 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr0: Ethernet address: 00:00:24:cb:eb:7c vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0004100-0xa00041ff irq 5 at device 7.0 on pci0 vr1: Quirks: 0x2 vr1: Revision: 0x96 miibus1: <MII bus> on vr1 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr1: Ethernet address: 00:00:24:cb:eb:7d vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0004200-0xa00042ff irq 9 at device 8.0 on pci0 vr2: Quirks: 0x2 vr2: Revision: 0x96 miibus2: <MII bus> on vr2 ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus2 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr2: Ethernet address: 00:00:24:cb:eb:7e vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem 0xa0004300-0xa00043ff irq 12 at device 9.0 on pci0 vr3: Quirks: 0x2 vr3: Revision: 0x96 miibus3: <MII bus> on vr3 ukphy3: <Generic IEEE 802.3u media interface> PHY 1 on miibus3 ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr3: Ethernet address: 00:00:24:cb:eb:7f isab0: <PCI-ISA bridge> at device 20.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 20.2 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xa0005000-0xa0005fff irq 15 at device 21.0 on pci0 usbus0 on ohci0 ehci0: <AMD CS5536 (Geode) USB 2.0 controller> mem 0xa0006000-0xa0006fff irq 15 at device 21.1 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 cpu0 on motherboard pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc8000-0xd27ff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> at port 0x40 on isa0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 ppc0: parallel port not found. uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: console (19200,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <AMD> at usbus0 uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <AMD> at usbus1 uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 4 ports with 4 removable, self powered stray irq7 uhub1: 4 ports with 4 removable, self powered ugen1.2: <vendor 0x1a40> at usbus1 uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus1 uhub2: 4 ports with 4 removable, self powered Timecounter "TSC" frequency 499913587 Hz quality 800 Root mount waiting for: usbus1 Root mount waiting for: usbus1 ugen1.3: <JMicron> at usbus1 umass0: <MSC Bulk-Only Transfer> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:3:0:-1: Attached to scbus3 da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <Hitachi HDS721010CLA332 > Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) Root mount waiting for: usbus1 ugen1.4: <Western Digital> at usbus1 umass1: <Western Digital Ext HDD 1021, class 0/0, rev 2.00/20.21, addr 4> on usbus1 umass1: SCSI over Bulk-Only; quirks = 0x0100 umass1:4:1:-1: Attached to scbus4 Trying to mount root from ufs:/dev/ufsid/49fabde14312a481 [rw,noatime]... mountroot: waiting for device /dev/ufsid/49fabde14312a481 ... da1 at umass-sim1 bus 1 scbus4 target 0 lun 0 da1: <WD Ext HDD 1021 2021> Fixed Direct Access SCSI-4 device da1: 40.000MB/s transfers da1: 953867MB (1953519616 512 byte sectors: 255H 63S/T 121600C) Mounting from ufs:/dev/ufsid/49fabde14312a481 failed with error 19. Loader variables: vfs.root.mountfrom=ufs:/dev/ufsid/49fabde14312a481 vfs.root.mountfrom.options=rw,noatime Manual root filesystem specification: <fstype>:<device> [options] Mount <device> using filesystem <fstype> and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:tank cd9660:/dev/acd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) <empty line> Abort manual input mountroot> ? List of GEOM managed disk devices: ufsid/4dcbe318bd6838cd da1s1a da1s1 da1 ufsid/4edc3dd3db9a086c da0s1a da0s1 da0 mountroot> panic: mountroot: unable to (re-)mount root. cpuid = 0 KDB: stack backtrace: #0 0xc0af3aff at kdb_backtrace+0x4f #1 0xc0ac052f at panic+0x16f #2 0xc0b4fe93 at vfs_mountroot+0xf63 #3 0xc0a705c0 at start_init+0x60 #4 0xc0a90526 at fork_exit+0x96 #5 0xc0e0f6e4 at fork_trampoline+0x8 Uptime: 1m18s Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. ~ [EOT]
POST: 012345689bcefghips1234ajklnopqr,,,tvwxy comBIOS ver. 1.33c 20080626 Copyright (C) 2000-2008 Soekris Engineering. net5501 CPU Geode LX 500 Mhz 0000 Mbyte Memory0512 Pri Sla WDC WD3200BEVT-00ZCT0 LBA Xlt 1024-255-63 134 Gbyte Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int ------------------------------------------------------------------- 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 Seconds to automatic boot. Press Ctrl-P for entering Monitor. 2 1 F1 FreeBSD Boot: F1 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.3-RELEASE-p3 #0: Mon Jun 11 23:52:38 UTC 2012 r...@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Geode(TM) Integrated Processor by AMD PCS (499.91-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x5a2 Family = 5 Model = a Stepping = 2 Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX> AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!> real memory = 536870912 (512 MB) avail memory = 506503168 (483 MB) kbd1 at kbdmux0 K6-family MTRR support enabled (2 registers) ACPI Error: A valid RSDP was not found (20101013/tbxfroot-309) ACPI: Table initialisation failed: AE_NOT_FOUND ACPI: Try disabling either ACPI or apic support. cryptosoft0: <software crypto> on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 glxsb0: <AMD Geode LX Security Block (AES-128-CBC, RNG)> mem 0xa0000000-0xa0003fff irq 10 at device 1.2 on pci0 vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0004000-0xa00040ff irq 11 at device 6.0 on pci0 vr0: Quirks: 0x2 vr0: Revision: 0x96 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr0: Ethernet address: 00:00:24:cb:eb:7c vr0: [ITHREAD] vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0004100-0xa00041ff irq 5 at device 7.0 on pci0 vr1: Quirks: 0x2 vr1: Revision: 0x96 miibus1: <MII bus> on vr1 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr1: Ethernet address: 00:00:24:cb:eb:7d vr1: [ITHREAD] vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0004200-0xa00042ff irq 9 at device 8.0 on pci0 vr2: Quirks: 0x2 vr2: Revision: 0x96 miibus2: <MII bus> on vr2 ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus2 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr2: Ethernet address: 00:00:24:cb:eb:7e vr2: [ITHREAD] vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem 0xa0004300-0xa00043ff irq 12 at device 9.0 on pci0 vr3: Quirks: 0x2 vr3: Revision: 0x96 miibus3: <MII bus> on vr3 ukphy3: <Generic IEEE 802.3u media interface> PHY 1 on miibus3 ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow vr3: Ethernet address: 00:00:24:cb:eb:7f vr3: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 20.2 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata0: [ITHREAD] ata1: <ATA channel> at channel 1 on atapci0 ata1: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xa0005000-0xa0005fff irq 15 at device 21.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ehci0: <AMD CS5536 (Geode) USB 2.0 controller> mem 0xa0006000-0xa0006fff irq 15 at device 21.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <AMD CS5536 (Geode) USB 2.0 controller> on ehci0 cpu0 on motherboard pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc8000-0xd27ff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 ppc0: parallel port not found. uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: [FILTER] uart0: console (19200,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 uart1: [FILTER] Timecounter "TSC" frequency 499905137 Hz quality 800 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ad1: DMA limited to UDMA33, device found non-ATA66 cable ad1: 305245MB <WDC WD3200BEVT-00ZCT0 11.01A11> at ata0-slave UDMA33 ugen0.1: <AMD> at usbus0 uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <AMD> at usbus1 uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Root mount waiting for: usbus1 usbus0 uhub0: 4 ports with 4 removable, self powered stray irq7 Root mount waiting for: usbus1 uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.2: <vendor 0x1a40> at usbus1 uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on usbus1 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 Root mount waiting for: usbus1 ugen1.3: <JMicron> at usbus1 umass0: <MSC Bulk-Only Transfer> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: <Hitachi HDS721010CLA332 > Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) Root mount waiting for: usbus1 ugen1.4: <Western Digital> at usbus1 umass1: <Western Digital Ext HDD 1021, class 0/0, rev 2.00/20.21, addr 4> on usbus1 umass1: SCSI over Bulk-Only; quirks = 0x0100 umass1:1:1:-1: Attached to scbus1 Trying to mount root from ufs:/dev/ufsid/49fabde14312a481 da1 at umass-sim1 bus 1 scbus1 target 0 lun 0 da1: <WD Ext HDD 1021 2021> Fixed Direct Access SCSI-4 device da1: 40.000MB/s transfers da1: 953867MB (1953519616 512 byte sectors: 255H 63S/T 121600C) Setting hostuuid: 8b838097-3635-11de-906d-000024cbeb7c. Setting hostid: 0x5db020e4. Entropy harvesting: interrupts ethernet point_to_point kickstart. Starting file system checks: /dev/ufsid/49fabde14312a481: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufsid/49fabde14312a481: clean, 118123 free (459 frags, 14708 blocks, 0.2% fragmentation) /dev/ufsid/4dcbe318bd6838cd: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufsid/4dcbe318bd6838cd: clean, 288950065 free (73993 frags, 36109509 blocks, 0.0% fragmentation) /dev/ufsid/49fabde2a6c23663: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufsid/49fabde2a6c23663: clean, 253809 free (25 frags, 31723 blocks, 0.0% fragmentation) /dev/ufsid/4edc3dd3db9a086c: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufsid/4edc3dd3db9a086c: clean, 284826655 free (117759 frags, 35588612 blocks, 0.0% fragmentation) /dev/ufsid/49fabde2c9dcb562: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufsid/49fabde2c9dcb562: clean, 144870240 free (115712 frags, 18094316 blocks, 0.1% fragmentation) /dev/ufsid/49fabdf0c6be4081: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufsid/49fabdf0c6be4081: clean, 87164 free (14172 frags, 9124 blocks, 1.9% fragmentation) Mounting local file systems:. Setting hostname: spiff.home.crhalpin.org. vr0: link state changed to DOWN Starting Network: lo0 vr0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE> ether 00:00:24:cb:eb:7c inet 192.168.2.2 netmask 0xffffff00 broadcast 192.168.2.255 media: Ethernet autoselect (none) status: no carrier add net default: gateway 192.168.2.1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Starting devd. vr0: link state changed to UP Creating and/or trimming log files. Starting syslogd. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat /usr/local/lib/dovecot /usr/local/lib/dovecot/imap /usr/local/lib/dovecot/lda /usr/local/lib/dovecot/pop3 /usr/local/lib/nss /usr/local/lib/pidgin /usr/local/lib/pth a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout Starting stunnel. Clearing /tmp. Starting lmtp2nntp. Updating motd:. Starting fusefs. fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19 Starting ntpd. Starting smartd. Starting spamd. Feb 17 11:26:19 spiff kernel: stray irq7 Starting clamav_clamd. Starting clamav_freshclam. postfix/postfix-script: starting the Postfix mail system Starting dovecot. Starting sshd. Starting cron. Starting inetd. Feb 17 11:28:25 spiff kernel: stray irq7 Sun Feb 17 11:28:25 CST 2013 FreeBSD/i386 (spiff.home.crhalpin.org) (ttyu0) login: ~ [EOT]
pgpjihQyplMGM.pgp
Description: PGP signature
_______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech