Do operational considerations let you swap that msata into another 6501, to see if the problem follows or not?
-Jed On Sep 12, 2013, at 1:50 PM, Michael Sierchio <ku...@tenebras.com> wrote: > > I have a net6501 that will not boot properly from power-on. It's the only one > in my stable of many net6501-70s that will not do so. > > This is with FreeBSD 9.1, but same behavior is observed with other (older) > versions. There is no difference when fastboot is disabled or enabled, so > I've disabled it here for brevity. If I press Enter at the boot prompt, it > boots (the default works). This same mSATA drive will autoboot on all the > other boxes I have. > > Has anyone run across this before? It doesn't do it every time, but having a > box that doesn't reliably boot after a power event is - er - suboptimal. > > - M > > --------schnipp hier-------- > > > POST: 0123456789bcefghipsajklnopqr,,,tvwxy > > > > > > > > > comBIOS ver. 1.41c 20121115 Copyright (C) 2000-2011 Soekris Engineering. > > net6501 > > 2048 Mbyte Memory CPU Atom E6xx 1600 Mhz > > > SATA AHCI BIOS ver. 0.61 20121115 Copyright (C) 2003-2011 Intel Corporation > > Controller Bus#02, Device#06, Function#00: 02 Ports, 01 Devices > Port-00: Hard Disk, INTEL SSDMAEXC020G3 > Port-01: No device detected > > Soekris USB Expansion ROM ver. 1.01 20111203 > > > Initializing Intel(R) Boot Agent GE v1.3.72 > PXE 2.1 Build 089 (WfM 2.0) > > Seconds to automatic boot. Press Ctrl-P for entering Monitor. > - > FreeBSD/x86 boot > Default: 0:ad(0p2)/boot/loader > boot: > > _______________________________________________ > Soekris-tech mailing list > Soekris-tech@lists.soekris.com > http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech
