> You need to get the 'PCH UART' driver out of the way as it claims the port > and does not work on the Soekris board...
PCH UART is working fine with Soekris net6501.. I am using also the second on-board serial port with that driver without any problems.. [ 1.938356] pch_uart 0000:02:0a.1: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.944065] pch_uart 0000:02:0a.1: irq 24 for MSI/MSI-X [ 1.944131] pch_uart 0000:02:0a.1: ttyPCH0 at I/O 0x1040 (irq = 24, base_baud = 0) is a pch_uart [ 1.957425] pch_uart 0000:02:0a.2: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.963122] pch_uart 0000:02:0a.2: irq 25 for MSI/MSI-X [ 1.963172] pch_uart 0000:02:0a.2: ttyPCH1 at I/O 0x1048 (irq = 25, base_baud = 0) is a pch_uart [ 1.976438] pch_uart 0000:02:0a.3: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.982136] pch_uart 0000:02:0a.3: irq 26 for MSI/MSI-X [ 1.982184] pch_uart 0000:02:0a.3: ttyPCH2 at I/O 0x1050 (irq = 26, base_baud = 0) is a pch_uart [ 1.995453] pch_uart 0000:02:0a.4: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 2.001147] pch_uart 0000:02:0a.4: irq 27 for MSI/MSI-X [ 2.001198] pch_uart 0000:02:0a.4: ttyPCH3 at I/O 0x1058 (irq = 27, base_baud = 0) is a pch_uart [ 2.020732] pch-dma 0000:02:0a.0: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 2.032356] pch-dma 0000:02:0c.0: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 4.118612] ptp_pch 0000:02:0c.4: PCI->APIC IRQ transform: INT C -> IRQ 18 I am also accessing my APC UPS as /dev/ttyPCH0 without any problems. Conrad _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
