Assuming you dropped a zero and tried 19,200 and above, I would at least try 9,600. If that fails, it's probably best to try all the lower speeds as well. And try eliminating the crossover.
You could also try removing the SSD to see if you get the BIOS to come up. -Jed > On Jan 17, 2015, at 9:20 AM, Johannes Graumann <[email protected]> > wrote: > > Hello, > > I am trying to start playing with a net6501 whcih I stuck a 120GB SSD into. > > I connect the box via a crossover serial cable to a iogear Usb to serial > RS-323 adapter, moprobe pl2303 on my linux box and when plugging the > adapter > in, can see /dev/ttyUSB0 comming up via udevadm monitor. Using cutecom, > bautrate 1920 and above device, I seem to be able to connect, but no matter > what I do (power off/on, reset, etc.) - there's no communication showing up > in the cutecom windows ... can anybody spot what I'm doing wrong her? > > Sincerely, Joh > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
