Change default console to tty0. - Regards, Nick Sent from my Motorola Nexus 6
On Apr 10, 2015 3:40 AM, "Peter Bako" <[email protected]> wrote: > > Has anybody successfully installed OpenBSD 5.6 on a net4801? I have two of > these units (both with the latest 133 firmware), each failing in the exact > same way, at the exact same place, while doing a PXE install. I can see my > TFTP server being queried for pxeboot, bsd.rd and boot.conf, so I know the > PXE setup is correct. On my serial terminal I can see the box starting the > BSD boot, loads the kernel then displays "entry point at 0x200120" and > stops. Thinking it just might be slow I've left sitting for as long as 10 > minutes, but it just hangs there. Since both units are doing this I am > wondering if there was a change in OpenBSD which causes the install to fail > on these older units... > > Thanks, > Peter > > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
