Hi Jed, Thanks for the tips. I've tried a new power supply, removing connections to GPS and boot device and changing serial settings - there's no change.
I guess I must accept that it's dead... Toby On Wed, Aug 3, 2016 at 6:33 PM, Jed Clear <jcl...@speakeasy.net> wrote: > Just general advice. See if the console speed reverted to 19200 or 9600. > Trying a different power supply. Removing the boot device. Remove the GPS. > Maybe they draw the power supply down to marginal levels. > > -Jed > > > On Aug 3, 2016, at 6:32 AM, Toby Riddell <toby.ridd...@prevtec.com> > wrote: > > > > Hi all, > > > > I have a net4501 which I was hoping to turn into a super-accurate NTP > server. However as I was nearing the end of the project FreeBSD logged > 'Fatal trap 12' and reset. The net4501 failed to reboot and now after > powercycling it the red LED is on constantly and there's no activity on the > console. 'Fatal trap 12' looks like it may be cause by a hardware issue. > > > > Is there anything I can do to fix it, or is it destined for recycling? > > > > Thanks. > > > > Toby > > _______________________________________________ > > Soekris-tech mailing list > > Soekris-tech@lists.soekris.com > > http://lists.soekris.com/mailman/listinfo/soekris-tech > >
_______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech