Here is the assembled unit:
http://ph.groups.yahoo.com/group/soft_radio/photos/view/7d94?b=2
The hardest part of the assembly was getting the pads lined up
properly so that I could tack down two opposite corners. Once that was
done I applied plenty of gel flux to each row of pads and drag
soldered them, a row at a time, using a 1/64" conical bit cartridge
with my Metcal system. I haven't got any bridges and the joints look
OK. I used a stereo dissecting microscope (X20 magnification).
73, Leon
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/soft_radio/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/soft_radio/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
