--- In [email protected], Kamal Jit <[EMAIL PROTECTED]> wrote: > > Dear Alberto, > Thanks a million for your informative reply. Alberto let me introduce me to yourself. I am a doctor by profession, callsign as vu2hsy, you can see me on qrz.com. I became a ham since 1988 when i got my licanse. Now when i imported a rig FT747GX, for which i had to struggle a lot, it was ok for a few months, but since about mid 1989 it had always given me a lot of trouble and even now i am frustrated. When i got the info about SDR i got delighted and now as it is very new to me i am struggling to make it. Your article for SDR hardware is only PART I and not Part II on the site. I am waiting for it. >
Dear Kamal, are you sure you are not mistaking me for another person ? I don't remember having sent you any messages in the past. And moreover I haven't written any PART I article about SDR hardware.... you must be confusing me with another person. Anyway I sympathize with you for the problems you have had with your FT747GX, and surely, if you will make the transition to SDR, where the hardware is reduced to the bare essential, I'm sure you will have a lot less headaches (at least those generated by the hardware...:-) Good luck and 73 de Alberto I2PHD
