Hello Alberto, I use Loop.DLL in Multipsk.
Here is an extract of the help. "Button "HB9TLK SdR interface": this experimental interface is based on the HB9TLK DLL "Loop.DLL". This file must be put in the Multipsk folder. It permits to connect a SdR transceiver to Multipsk (as a VAC "cable"). The "loop.dll" file is available at the adress: "http://hb9tlk.selfip.com/softrock/index.html""; Note (for information): with Cesco (HB9TLK), we have developped a TCP/IP (RX/TX) link for interface between demodulation programs and decoding programs. For instance, it is used to interface Multidem (RX only) and Gui_serv_Multipsk (RX/TX) with Multipsk. Specifications are available and Cesco proposes his code source. It could be another way to interface SdR receivers with decoding programs (not limited to Multipsk) 73 Patrick ----- Original Message ----- From: i2phd To: [email protected] Sent: Tuesday, August 28, 2007 5:27 PM Subject: [soft_radio] Re: SDRadio --- In [email protected], "wb8lga" <[EMAIL PROTECTED]> wrote: > > > Alberto have you ever though of making your SDRadio program > able to use the Loop.DLL . That way the users that are > into Digital SSTV can use your program also ? Right now the > only good program is KGKSDR11. His agc section doesn't handle > static noises very good . His attack is slow (loose of data durning > AGC change ) but the decay time is OK, where yours do very good with > that type of noise . > > Charles Beener > WB8LGA Charles, I must confess that this is the first time I read about a Loop DLL. I don't know what it is and what it does. I will search for it in the Internet, 73 Alberto I2PHD
