Spectravue 2.3 http://www.moetronix.com/spectravue.htm <http://www.moetronix.com/spectravue.htm>
This software has SDR-14 features but may be used with COM PORT, USB audio and Line Input from the sound card in a 48000 sample rate with a 24000 c.f. and 48000 spectrum display bandwidth. I am using it off of the USB audio input. And it has a very nice noise blanker, and filter settings. It also demodulates, AM, FM. SSB, and DSB, as well as CW. Sorry, no notch filter. For those of you using various DDS sections there is a "Custom" provision to program the software for the DDS you have, if you have the time and skill. To configure for a QSD Board such as SoftRock40 in the Menu Bar select "Input Device / Soundcard" The select "Soundcard In Setup" slecty either sound card audio or USB audio and set the soundcard sample rate for 48000 and the LO IN or c.f. at 24000 and the spectrum bandwidth at 48000. The just beneath the frequency readout is a start button you have to locate to turn it in and run it. Now it does not have Advanced IQ (AIQB) so it is prone to allot of soundcard images. Features include, 2 D plot, 3 D Plot, Waterfall Display, Combo Display, Phase, Continuim. And software screen shot. Plus lots of configuration stuff. There is also a server for WiFi, or Internet Antenna.
