Laz пишет:
>vdr-1.5.0 --video=/video --config=/home/vdr/vdrconf --lib=/home/vdr/plugins
>-P'softdevice -vo
>dfb:viatv:cle266'
>[softdevice] processing args
>[softdevice] argv [0] = softdevice
>[softdevice] argv [1] = -vo
>vo_argv: dfb:viatv:cle266
>[softdevice] enabling field parity
>[softdevice] enabling CLE266 HW decoding
>[setup-softdevice] alsa ac3Mode set to: 0
>[setup-softdevice] alsa AC3 device set to: hw:0,1
>[setup-softdevice] alsa device set to: default
>[setup-softdevice] A/V Offset set to (0)
>[setup-softdevice] Cropping 0 lines from bottom
>[setup-softdevice] Cropping 0 columns from left
>[setup-softdevice] cropping mode set to 0 (none)
>[setup-softdevice] cropping mode toggle key set to 0 (none)
>[setup-softdevice] Cropping 0 columns from right
>[setup-softdevice] Cropping 0 lines from top
>[setup-softdevice] deinterlace method set to 0 none
>[setup-softdevice] mainMenu: 1
>[setup-softdevice] setting alpha blend mode to pseudo
>[softdevice] picture mirroring set to 0 (off)
>[setup-softdevice] pixel format set to (I420)
>[setup-softdevice] shouldSuspend to: 0
>[setup-softdevice] syncTimerMode: sig
>[softdevice] UseStretchBlitset to off
>[setup-softdevice] vidBrightness: 50
>[setup-softdevice] vidContrast: 50
>[setup-softdevice] vidHue: 50
>[setup-softdevice] vidSaturation: 50
>[setup-softdevice] startup aspect set to (4:3 normal)
>[softdevice] initializing Plugin
>[softdevice] Initializing Video Out
>[softdevice] ffmpeg build(3344640)
>[dfb] init
>
> =======================| DirectFB 1.0.0-rc3 |
>=======================
> (c) 2001-2006 United Cultures of Earth - go for outer space!
> (c) 2000-2004 Convergence (integrated media) GmbH
> ----------------------------------------------------------------
>
>(*) DirectFB/Core: Single Application Core. (2007-01-26 10:52)
>(*) Direct/Modules: suppress module 'linux_input'
>(*) Direct/Modules: suppress module 'joystick'
>(*) Direct/Modules: suppress module 'lirc'
>(*) DirectFB/Genefx: MMX detected and enabled
>(*) DirectFB/Graphics: VIA/S3G CLE266/UniChrome 0.4 (-)
>(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
>[dfb] RAM: 66842624 bytes
>[dfb] Accellerated Functions: FillRectange DrawRectange DrawLine
>FillTriangle Blit StretchBlit All
>[dfb] Drawing Flags: Blend Xor
>[dfb] Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize
>SrcColorkey DstColorkey Deinterlace
>[dfb] Supported video Modes are: [EMAIL PROTECTED]
>[dfb] Enumerating display Layers
>[dfb] Configuring CooperativeLevel for OSD
>Layer 0 VIA CLE266 Graphics Type: graphics
> Caps: alphachannel brightness contrast opacity saturation src_colorkey
>surface
>Layer 1 VIA Unichrome Video Type: graphics picture video
> Caps: deinterlacing dst_colorkey levels field_parity opacity
>screen_location surface
>Initialising CLE266 decoder (/dev/fb0): success!
>CLE266: Creating buffers for decoder
>CLE266: Creating buffer number 0
>CLE266: Creating buffer number 1
>CLE266: Creating buffer number 2
>CLE266: Creating buffer number 3
>CLE266: passing mpegfb_stride
>CLE266: passing buffers to decoder
>[dfb] (osdLayer): flags, options, pixelformat: 0000000f, 00000000 00418c04
>[dfb] (osdLayer): width, height: 720 576
>[dfb] osdLayer has alpha channel
>[dfb] init
>EXITING:action=IDirectFBDisplayLayer::SetConfiguration(DFBDisplayLayerConfig&),
>
>result=Not supported!
> (!!!) *** WARNING [Application exited without deinitialization of
>DirectFB!] *** [../../../src/core/core.c:745 in dfb_core_deinit_check()]
>
>Which all looks OK until I get to the end!
>
>:-(
>
>Is there anything in DirectFB which has chagned drastically for the
>Unichrome driver?
>
>
>
I get week ago same error with directfb-cvs.
Today I update softdevice from cvs and saw that was some changes.
From CHANGELOG:
2007-01-20:
- Fixed video-dfb for VIA-unichrome with current DIRECTFB cvs. In
directfbrc
pixelformat=AiRGB must be specified.
Regards,
Vladimir Monchenko.
_______________________________________________
Softdevice-devel mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/softdevice-devel
