Quoting Leo Márquez: We are not ignoring your post, but since I've no concrete idea what went wrong it's a bit hard to help.
> Hi, > > I'm experimenting a lot of problems to run vdr, softdevice with > dfb:cle266:viatv > The output is poor, I don't see live video, only a single frames each 2 > seconds. It's very strange. > In vdr console I see all time an X character. Keyboard don't work and if > I try to set the softdevice keys with the keyboard it ask always for the > up and down keys ¿? > > vdr console output: > > 19:02:01.0567 D [10555] [dfb] (re)configuring Videolayer to 736 x 576 > (736x576) > 19:02:01.0567 D [10555] [dfb] SetParams: Enabling DLOP_FIELD_PARITY > 19:02:01.0598 D [10555] [dfb] surface capabilities for (videoSurface): > videoonly, flipping, triple-buffered, PixelFormat = 0x08100609 > 19:02:01.0598 D [10555] [dfb] (re)configured 0x08100609 > 19:02:21.0096 D [10563] [VideoOut] reset: sync info: repF = 0, drpF = 0, > totF = 0 > allocating buffer format orig->format 0 > 19:02:21.0392 D [10566] [dfb] (re)configuring Videolayer to 720 x 576 > (720x576) > 19:02:21.0393 D [10566] [dfb] SetParams: Enabling DLOP_FIELD_PARITY > 19:02:21.0559 D [10566] [dfb] surface capabilities for (videoSurface): > videoonly, flipping, triple-buffered, PixelFormat = 0x08100609 > 19:02:21.0559 D [10566] [dfb] (re)configured 0x08100609 > 19:02:23.0145 D [10566] [VideoOut] video now synced (10 - 0) > 19:02:23.0596 D [10568] [VideoOut] reset: sync info: repF = 0, drpF = 0, > totF = 10 > allocating buffer format orig->format 0 > CLE266 warning: frame had errors, resetting decoder May be caused by bad reception. Can you check your signal quality ? Are you using both (tv-out + vga-out) output connectors at the same time ? With epia I use only vga-out. So I disable tv-out at module load time. In one of your other logs, I saw the line: [setup-softdevice] deinterlace method set to 1 lavc I don't know if that setting has some influence, when using hw-decoder. I guess it should be ignored in that case, but it is not :-( . So disable postprocessing ! Stefan Lucke _______________________________________________ Softdevice-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/softdevice-devel
