It is quite unusual to update operators based on another global PPG's parameter I think, though theoretically it should work if the operator uses the Property's relevant parameters as an input.
Check out http://download.autodesk.com/global/docs/softimage2014/en_us/sdkguide/si_om/CustomOperator.html
and in particular: http://download.autodesk.com/global/docs/softimage2014/en_us/sdkguide/si_om/CustomOperator.AddInputPort.html
No, it's not Immediate Mode. After the PPG is closed, the operator values update correctly. But they don't update when changing the slider value while the PPG is open.I will delete the custom property once the user closes the PPG, so I think it's not too important where it's stored.
On Tue, Nov 5, 2013 at 12:37 PM, Stefan Kubicek <[email protected]> wrote:
Could it be that you have immediate mode enabled?Also, why do you store the parameters in a global PPG in the SceneRoot rather than on the actual operator per object?
Script is roughly as follows:Hi list,My script generates a bevel operator on an object. I then want a PPG to pop up that allows the user to change certain parameters of the bevel operator. These parameters should update whenever the values in the PPG are changed. However, they only update after the PPG is closed via OK. Can someone point me in the right direction here?
# Lots of stuff after which a bevel operator (op) is generated
MyPSet = A.ActiveSceneRoot.AddProperty("CustomProperty", False, "Bevel_Options")
MyLayout = MyPSet.PPGLayout
MyPSet.AddParameter3("PBevelRatio", c.siFloat, 10, 0.01, 100)
MySlider = MyLayout.AddItem("PBevelRatio", "Ratio", c.siControlNumber)
A.InspectObj(MyPSet, "", "Choose Bevel Options", c.siModal, False)
op.Parameters("ratio").Value = MyPSet.Parameters("PBevelRatio").ValueThank you
Christian---------------------------------------------
Stefan Kubicek
-------------------------------------------
keyvis digital imagery
Alfred Feierfeilstraße 3
A-2380 Perchtoldsdorf bei Wien
Phone: +43/699/12614231
www.keyvis.at [email protected]
-- This email and its attachments are --
--confidential and for the recipient only--
--
-------------------------------------------
Stefan Kubicek
-------------------------------------------
keyvis digital imagery
Alfred Feierfeilstraße 3
A-2380 Perchtoldsdorf bei Wien
Phone: +43/699/12614231
www.keyvis.at [email protected]
-- This email and its attachments are --
--confidential and for the recipient only--
Stefan Kubicek
-------------------------------------------
keyvis digital imagery
Alfred Feierfeilstraße 3
A-2380 Perchtoldsdorf bei Wien
Phone: +43/699/12614231
www.keyvis.at [email protected]
-- This email and its attachments are --
--confidential and for the recipient only--
