Sorry, Gustavo, I didn't mean to mail you privately - my webmail does this on and off if I am not careful to check.
I have actually seen nothing about mass in the Lagoa docs, except for a brief mention about general behavior for various mateials. In my case I am pouring espresso coffee into a cup - this basically means I need the fluid to consist mainly of foam in the pouring part, but as it settles in the cup the foam floats to the top and dense fluid gathers at the bottom. I was thinking to not change phases but mix fluid with foam and pour that into the cup, then because the foam is lighter it should be pushed to the top when it settles in the cup. It seems I need to get boundary pressure settings right, but it is poorly described, and not working for me, this far. Morten Den 3. januar 2014 kl. 13:34 skrev [email protected]: > Ooops, sorry Morten, I did not see you were talking to me privately. Yeah, > the docs and sample scenes seem not enough. Most of the times I have tried > to make 1 material look ok in Lagoa I get ok results, but trying to get 2 > or more different materials to interact I always get unexpected results too > :/ > Specially with bubbles which are a completely different density then water, > and they have varying sizes and all, very hard (if ever possible) to get it > looking right in Lagoa. > > > De: Morten Bartholdy <mailto:[email protected]> > Enviado: sexta-feira, 3 de janeiro de 2014 09:17 > Para: Gustavo Boehs <mailto:[email protected]> > > beep - does not compute... > > I have gone through the docs, and they are only so so informative and there > is no sample scene I can find covering the subject. There is some semi > helpful stuff about pressures defining mixing fluids behavior but as with a > lot of the ICE docs, they say the button is there, but not how to apply to > real life scenarios... > > Kind of lost here. > > Morten > > > > > > > Den 2. januar 2014 kl. 19:43 skrev Gustavo Eggert Boehs > <[email protected]>: > > > > > Bump bump > > > > Em 02/01/2014 11:08, "Morten Bartholdy" < [email protected] > > <mailto:[email protected]> > escreveu: > > > > > > I haven't used Lagoa a lot, but am trying to create a liquid sim with > > > bubbles falling into the liquid then floating to the surface and layering > > > on top. I see in the docs I need to use phases for this, but I can't find > > > the mass/density parameter for the material. Where do I find this? > > > > > > Thanks. > > > > > > Morten > > > > > > > >
