Have you created one (or the rig) lately? It's over 2 meters tall!
Or it's my install that's somehow buggered.....;-)
Rob
\/-------------\/----------------\/
On 2-4-2014 23:05, Sebastien Sterling wrote:
Wasn't the traditional idea to use the XSI man mesh as a scale reference ?
On 2 April 2014 21:54, Matt Lind <[email protected]
<mailto:[email protected]>> wrote:
I saw the Form 1 in depth at Siggraph last year.
For desktop printers under $5,000 USD, it's definitely the best
quality printer. It's the only stereo lithography printer
available at that price and can print with at least 4x better /
finer resolution than the extrusion based printers such as
Makerbot. Even though the device is targeted for prototyping, it
has enough quality to be used as final output for some
applications. Down side is the print volume is quite small, your
very limited on choice of printing materials (which also have
relatively short shelf life), and the agents used in the process
are caustic. You need to wear protective gloves to remove the
output from the printer and give it a chemical bath before it's
safe to hold with your bare hands -- they don't tell you that part
until you open the box.
Matt
*From:*[email protected]
<mailto:[email protected]>
[mailto:[email protected]
<mailto:[email protected]>] *On Behalf Of
*David Rivera
*Sent:* Wednesday, April 02, 2014 11:14 AM
*To:* [email protected]
<mailto:[email protected]>
*Subject:* 3D Printing experience on Softimage
Hey everyone, thanks for your replies on the previous subject of
Quadro K4000.
Yesterday I was googling around for 3d printers. I really liked
this one:
http://www.youtube.com/watch?v=CHAU-9VIwzk
I was wondering if anyone has already start printing some 3D stuff
over anyone of these 3d printers?
I know there is a software that comes along with it so you can
input your models and print them out.
*David Rivera*
/3D Compositor/Animator/
LinkedIN <http://ec.linkedin.com/in/3dcinetv>
Behance <https://www.behance.net/3dcinetv>
VFX Reel <https://vimeo.com/70551635>
No virus found in this message.
Checked by AVG - www.avg.com <http://www.avg.com>
Version: 2014.0.4355 / Virus Database: 3722/7290 - Release Date: 04/02/14
