Locally the system works fine. Your spidey sense is also on spot.
A change was affected prior to all this. We suspect the same but can't prove it. I'm trying to rule out the application side first. What's weird is that it is strictly specific to Softimage only. Nothing else is affected. Until I can rule out the epic fail as caused by SI, this isn't helping. EOL is when again? The timing couldn't be worse... -- Joey Ponthieux LaRC Information Technology Enhanced Services (LITES II) Science Systems and Applications Inc. (SSAI) NASA Langley Research Center __________________________________________________ Opinions stated here-in are strictly those of the author and do not represent the opinions of NASA or any other party. From: [email protected] [mailto:[email protected]] On Behalf Of Sandy Sutherland Sent: Friday, April 22, 2016 2:59 PM To: [email protected] Subject: Re: script log at startup You might have mentioned this Joey, but in case not - did you try working with a scene locally, and see if the same thing happens - spidey sense is tingling my side to do with some sort of network issue, server issue - something like that. S. On 2016-04-22 07:22 PM, Ponthieux, Joseph G. (LARC-E1A)[LITES II] wrote: No. This started yesterday. In 30 years computing this is about one of the weirdest things I've ever seen. It can mount the remote drives, see everything there, save files, then reads files created within the active session. But any file not created during that session can't be read and gives an error. All scene files are good and readable. From the local machine there are no issues whatsoever. But when the default database is set to the remote drive, it starts leaving empty files behind with a namespace that's similar to other files that SI dumps such as the .dmp and .Scriptlog files. But no extension and 0 bytes. I thought maybe it has a read/write test on startup for the database but that it was never obvious that the test file was there because it might get deleted like the .dmp files do when you close Soft. If it is a read/write test something is interfering with its ability to finish the process and delete the test file. Thanks -- Joey Ponthieux LaRC Information Technology Enhanced Services (LITES II) Science Systems and Applications Inc. (SSAI) NASA Langley Research Center __________________________________________________ Opinions stated here-in are strictly those of the author and do not represent the opinions of NASA or any other party. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Stephen Blair Sent: Friday, April 22, 2016 2:13 PM To: [email protected]<mailto:[email protected]> Subject: Re: script log at startup And it's always been like this? Sounds like you should use strace or Process Monitor. There's no log that Softimage itself will write out. On Fri, Apr 22, 2016 at 2:04 PM, Ponthieux, Joseph G. (LARC-E1A)[LITES II] <[email protected]<mailto:[email protected]>> wrote: I just need to know what the software does on startup. In particular what tests it runs or files it creates, updates, etc. In particular is there any part of the startup process that is failing but not preventing Soft to run. Currently Soft is able to save a scene, it can then read it back in, but if I close Soft the saved file is no longer readable the next time Soft is run. I've deleted preferences. It is doing the same regardless what version of Soft I use. -- Joey Ponthieux LaRC Information Technology Enhanced Services (LITES II) Science Systems and Applications Inc. (SSAI) NASA Langley Research Center __________________________________________________ Opinions stated here-in are strictly those of the author and do not represent the opinions of NASA or any other party. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Henry Katz Sent: Friday, April 22, 2016 12:52 PM To: [email protected]<mailto:[email protected]> Subject: Re: script log at startup Presumably you want higher level than strace/ltrace if running under Linux? On 04/22/2016 12:21 PM, Ponthieux, Joseph G. (LARC-E1A)[LITES II] wrote: Hello, Does anyone know if it is possible to make XSI run a script log of everything it does at startup? -- Joey Ponthieux LaRC Information Technology Enhanced Services (LITES II) Science Systems and Applications Inc. (SSAI) NASA Langley Research Center __________________________________________________ Opinions stated here-in are strictly those of the author and do not represent the opinions of NASA or any other party. ------ Softimage Mailing List. To unsubscribe, send a mail to [email protected]<mailto:[email protected]> with "unsubscribe" in the subject, and reply to confirm. ------ Softimage Mailing List. To unsubscribe, send a mail to [email protected]<mailto:[email protected]> with "unsubscribe" in the subject, and reply to confirm. ------ Softimage Mailing List. To unsubscribe, send a mail to [email protected]<mailto:[email protected]> with "unsubscribe" in the subject, and reply to confirm. [https://ipmcdn.avast.com/images/2016/icons/icon-envelope-open-tick-round-orange-v1.png]<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. www.avast.com<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
------ Softimage Mailing List. To unsubscribe, send a mail to [email protected] with "unsubscribe" in the subject, and reply to confirm.
