8.3 order instead of 8.2 is OK Jerry NA0M
"James R. Elledge" <[EMAIL PROTECTED]> wrote: 8.3 ok with me if other version has not already been shipped. Jim - KB2XJ --- In [email protected], Mr John W Titmuss <[EMAIL PROTECTED]> wrote: > > 8.3 is fine Tony > > Cheers > > John de VK4JWT > > > ---- kb9yig <[EMAIL PROTECTED]> wrote: > > Good Morning All, > > > > Orders for the v8.0, v8.1 and v8.2 versions of the Lite+Xtall kit > > have gone well beyond the number of kits available. I would like to > > convert the excess orders to the v8.3 Lite+Xtall kit if it is ok with > > kit buyers. I will contact people individually concerning orders > > beyond what I will be able to fill within the next few days. > > > > A v8.3 kit with synchronous QSD clocking is in the works that has the > > same size board as the v8.1/v8.2 but provides a jumper option to use > > either the CMOS version of the Si570 or the LVDS version of the > > Si570. The v8.3 kit will include the FIN1002 and all other parts > > that mount on the circuit board except the Si570 device. (If a CMOS > > Si570 is used on the v8.3 board, the kit builder will omit a > > resistor, the FIN1002 part, and will solder in a jumper wire.) > > > > The v8.3 Lite+Xtall kit should be available at Dayton time and the > > kit will be priced at $26 US/Canada and $27 for DX where mailing > > costs are included in each kit price. Included with each kit will be > > four BPF kits to provide the band combinations 160m, 80m/40m, > > 30m/20m/17m, 15m/12m/10m. (Excess orders for a v8.0, v8.1, or v8.2 > > kits will not require any additional payment when converted to a v8.3 > > kit.) > > > > Thanks and 73, > > Tony KB9YIG > > >
