YESSSSS! Got one for 15/17! Afak rxtx 6.2 15/17 is 21025, 21160 and somewhere on 17m (info needed), with the same rx section of Lite (no Xtall). So it is a dual band rxtx (not a multiband rx like Lite+Xtall nor a multiband rxtxt like 6.3+Xtall not yet ready). I have no eyes to solder smd but no problem to box and cable them so I think that a light shipment of just the kit (no box, no connectors) is fine, but I don't want to create any problem, so if you prefer to send it with box and conns it should be ok too. I usually use PayPal: if you are going to make the 6.3 I can send some money to Tony on behalf of you, or I can pay you directly.
If you are willing to build two 6.3+Xtall, one for you, one for me, can manage the payment of both and wait till you end the one for me (supposed before Santa lives home...). Let me know how to manage the deal, either the 2x6.3 way or the 6.2/1517m is ok for me. Sometimes I have no time to check the group, but I will survive any job travel! 73s from Marco - I4MFA - W4MFA --- In [email protected], "Jose Bonanca" <[EMAIL PROTECTED]> wrote: > > Marco, > I have some 15/17 and 20/30 kit made and tested that I could spare since I > am going to make the RXTX 6.3 for my own use. > > You may have it already boxed in Black plastic box or you may have it only > the kit without connectors. > for the price I will have to check how much it costed. > > 73 > > On Mon, Jun 9, 2008 at 8:16 PM, i4mfa <[EMAIL PROTECTED]> wrote: > > > Thank YOU, very much and sorry for late reply. I am so often out of > > office to work and sometimes I have no way to reach ther group! Sorry > > for that, but, believe me, I am NOT a ghost! > > So, tahnk you again. > > I mailed Tony and the RXTX+Xtall v6.3 transceiver semms not to be > > available yet. I'd like to start with a xvcr, not just a rx, and the > > Xtall seems to me better than the 15/17 option. > > So as soon as I see a "ok, you can order" I'll be back on that. > > > > Question from a friend of mine: do you have a already built rx or > > txtx? $$?? (+ shipping to 40128 Bologna Italy). > > > > Than you VERY MUCH again (where are you from?), > > Marco - i4mfa - w4mfa > > > > --- In [email protected] <softrock40%40yahoogroups.com>, > > "reeder.ronnie" <ronniereeder2@> > > wrote: > > > > > > --- In [email protected] <softrock40%40yahoogroups.com>, > > "i4mfa" <i4mfa@> wrote: > > > > > > > > I'd like to test a RXTX+Xtall v6.3 transceiver on 20/17 (or 80/40) but > > > > it has been long time since my homemade vhf xverter and three > > > > different glasses to be used everyday make impossible to me to solder > > > > smd. So is anyone willing to build such a kit for me, or is anyone > > > > willing to sell his kit because he wants to experiment with another? > > > > Thank you in advance, > > > > Marco i4mfa w4mfa > > > > ARI - ARRL member > > > > > > > I am available to build kits for you. Write me at > > > ronniereeder@ and I will give you instructions on how to get > > > my mailing address. > > > Thanks, > > > Ronnie > > > > > > > > > > > > > -- > Jose Bonanca (CT1aos) >
