Hello,

Let me confirm about 2 description.

1) Section 2.5, Fragmentation Considerations

 For "If the exterior locator family of a SAM domain is IPv4" case, you 
mentioned as "having the "Don't Fragment" bit set to 1 may either be discarded 
(with appropriate ICMPv6 error message returned to the source).  Is this(ICMPv6 
error) correct way?  I suppose this might be ICMP error message and not ICMPv6.

2) Section 3.2.2, Multiple IPv4 Prefixes

 In this section, you described as "Since there are 3 domain exterior prefixes 
Dn, we have to choose 3 customer interior prefixes P, the lengths of each Cn 
must be such that k + cn + xn = 48, i.e. cn = 20...". But I suppose P = K[.H] 
is used here and the "Cn" is replaced for "Hn". Am I missed something?

Regards,

On 2010/03/02, at 3:30, [email protected] wrote:

> A New Internet-Draft is available from the on-line Internet-Drafts 
> directories.
> 
>       Title           : Stateless Address Mapping (SAM) for Softwire-Lite 
> Solutions
>       Author(s)       : R. Despres
>       Filename        : draft-despres-softwire-sam-00.txt
>       Pages           : 33
>       Date            : 2010-03-01
> 
> Stateless Address Mapping (SAM) is a generic mechanism which permits,
> in a number of new scenarios, to easily establish tunnels for packets
> of some address family to traverse domains where this family is not
> directly routed (softwires).  It generalizes address mapping
> principles of already deployed technologies such as 6to4, ISATAP, and
> 6rd, where encapsulations of IP over IP are used for point-to-
> multipoint tunnels (mesh softwires).
> 
> Identified use cases of SAM include native IPv6 across IPv4 NATs,
> IPv6 multihoming with provider-aggregatable prefixes, public IPv4
> across IPv6-only domains and, to mitigate consequences of the IPv4
> address shortage, extended IPv4 prefixes for statically shared IPv4
> public addresses.
> 
> A URL for this Internet-Draft is:
> http://www.ietf.org/internet-drafts/draft-despres-softwire-sam-00.txt
> 
> Internet-Drafts are also available by anonymous FTP at:
> ftp://ftp.ietf.org/internet-drafts/
> 
> Below is the data which will enable a MIME compliant mail reader
> implementation to automatically retrieve the ASCII version of the
> Internet-Draft.
> <メールの添付ファイル>_______________________________________________
> I-D-Announce mailing list
> [email protected]
> https://www.ietf.org/mailman/listinfo/i-d-announce
> Internet-Draft directories: http://www.ietf.org/shadow.html
> or ftp://ftp.ietf.org/ietf/1shadow-sites.txt

-------------------------------
Ruri Hiromi
INTEC Systems Institute, Inc. / Keio university
[email protected] >>>> [email protected]




_______________________________________________
Softwires mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/softwires

Reply via email to