A new version of I-D, draft-sarikaya-softwire-4rdmulticast-03.txt has been successfully submitted by Behcet Sarikaya and posted to the IETF repository.
Filename: draft-sarikaya-softwire-4rdmulticast Revision: 03 Title: Multicast Support for 4rd Creation date: 2012-07-17 WG ID: Individual Submission Number of pages: 15 URL: http://www.ietf.org/internet-drafts/draft-sarikaya-softwire-4rdmulticast-03.txt Status: http://datatracker.ietf.org/doc/draft-sarikaya-softwire-4rdmulticast Htmlized: http://tools.ietf.org/html/draft-sarikaya-softwire-4rdmulticast-03 Diff: http://tools.ietf.org/rfcdiff?url2=draft-sarikaya-softwire-4rdmulticast-03 Abstract: This memo specifies 4rd technology's multicast component so that IPv4 hosts can receive multicast data from IPv4 servers over an IPv6 network. In 4rd Translation Multicast solution for 4rd and translation variant of MAP, MAP-T, IGMP messages are translated into MLD messages at the CE router which is IGMP/MLD Proxy and sent to the network in IPv6. 4rd Border Relay does the reverse translation and joins IPv4 multicast group for 4rd hosts. Border Relay as multicast router receives IPv4 multicast data and translates the packet into IPv6 multicast data and sends downstream on the multicast tree. Member CEs receive multicast data, translate it back to IPv4 and transmit to the hosts. In 4rd encapsulation solution for encapsulation variant of MAP, MAP-E, IGMP Proxy at the 4rd Customer Edge router uses IPv4-in-IPv6 tunnel established by MAP-E to exchange IGMP messages to establish multicast state at MAP Border Relay so that MAP Border Relay can tunnel IPv4 multicast data to IPv4 hosts connected to MAP Customer Edge device. The IETF Secretariat _______________________________________________ Softwires mailing list [email protected] https://www.ietf.org/mailman/listinfo/softwires
