The draft described by this notice is concerned with Diameter provisioning of the required configuration for all methods covered by the universal CPE draft. The contents were determined independently of that draft. I will compare the results with what the universal CPE draft proposes in a separate E-mail.
Tom Taylor ---------- Forwarded message ---------- From: <[email protected]> Date: Sun, Mar 10, 2013 at 9:45 PM Subject: New Version Notification for draft-zhou-dime-4over6-provisioning-00.txt To: [email protected] Cc: [email protected] A new version of I-D, draft-zhou-dime-4over6-provisioning-00.txt has been successfully submitted by T. Taylor and posted to the IETF repository. Filename: draft-zhou-dime-4over6-provisioning Revision: 00 Title: Attribute-Value Pairs For Provisioning Customer Equipment Supporting IPv4-Over-IPv6 Transitional Solutions Creation date: 2013-03-11 Group: Individual Submission Number of pages: 11 URL: http://www.ietf.org/internet-drafts/draft-zhou-dime-4over6-provisioning-00.txt Status: http://datatracker.ietf.org/doc/draft-zhou-dime-4over6-provisioning Htmlized: http://tools.ietf.org/html/draft-zhou-dime-4over6-provisioning-00 Abstract: During the transition from IPv4 to IPv6, customer equipment may have to support one of the various transition methods that have been or are currently being defined for carrying IPv4 packets over IPv6. Work is currently in progress to enumerate the information that needs to be provisioned on a customer edge router to support a list of transition techniques based on tunneling IPv4 in IPv6, with a view to defining reusable components for a reasonable transition path between these techniques. To the extent that the provisioning is done dynamically, AAA support is needed to provide the information to the network server responsible for passing the information to the customer equipment. This document specifies Diameter attribute-value pairs to be used for that purpose. The IETF Secretariat
_______________________________________________ Softwires mailing list [email protected] https://www.ietf.org/mailman/listinfo/softwires
