The following errata report has been submitted for RFC7600,
"IPv4 Residual Deployment via IPv6 - A Stateless Solution (4rd)".

--------------------------------------
You may review the report below and at:
http://www.rfc-editor.org/errata_search.php?rfc=7600&eid=4430

--------------------------------------
Type: Editorial
Reported by: Michelle Cotton <[email protected]>

Section: 6

Original Text
-------------
(need to add the below text)

Corrected Text
--------------
This address is to be used only as IPv4 source of an ICMP error 
packet whose cause originated within a tunnel across an IPv6-only 
domain. As such, it should never be used as a destination 
(and consequently never forwarded). When receiving an IPv4 
packet with this address as source, no specific action that would 
reserve this address for this protocol is required (dealing as usual 
with the error cause specified in the ICMP packet is sufficient).



Notes
-----
While processing the IANA Actions for this document, the authors requested that 
the above text be added to the IANA Considerations section.  The published 
version does not include this text.

Instructions:
-------------
This erratum is currently posted as "Reported". If necessary, please
use "Reply All" to discuss whether it should be verified or
rejected. When a decision is reached, the verifying party (IESG)
can log in to change the status and edit the report, if necessary. 

--------------------------------------
RFC7600 (draft-ietf-softwire-4rd-10)
--------------------------------------
Title               : IPv4 Residual Deployment via IPv6 - A Stateless Solution 
(4rd)
Publication Date    : July 2015
Author(s)           : R. Despres, S. Jiang, Ed., R. Penno, Y. Lee, G. Chen, M. 
Chen
Category            : EXPERIMENTAL
Source              : Softwires
Area                : Internet
Stream              : IETF
Verifying Party     : IESG

_______________________________________________
Softwires mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/softwires

Reply via email to