The following errata report has been verified for RFC7598, "DHCPv6 Options for Configuration of Softwire Address and Port-Mapped Clients".
-------------------------------------- You may review the report below and at: http://www.rfc-editor.org/errata_search.php?rfc=7598&eid=4865 -------------------------------------- Status: Verified Type: Technical Reported by: Ian Farrer <[email protected]> Date Reported: 2016-11-15 Verified by: Terry Manderson (IESG) Section: 4.3 Original Text ------------- dmr-prefix6-len: 8 bits long; expresses the bitmask length of the IPv6 prefix specified in the dmr-ipv6-prefix field. Allowed values range from 0 to 128. Corrected Text -------------- dmr-prefix6-len: 8 bits long; expresses the bitmask length of the IPv6 prefix specified in the dmr-ipv6-prefix field. Allowed values range from 0 to 96. Notes ----- This field is used to provision the default mapping rule prefix length, which is defined in section 5.1 of RFC7599: The DMR IPv6 prefix length SHOULD be 64 bits long by default and in any case MUST NOT exceed 96 bits. -------------------------------------- RFC7598 (draft-ietf-softwire-map-dhcp-12) -------------------------------------- Title : DHCPv6 Options for Configuration of Softwire Address and Port-Mapped Clients Publication Date : July 2015 Author(s) : T. Mrugalski, O. Troan, I. Farrer, S. Perreault, W. Dec, C. Bao, L. Yeh, X. Deng Category : PROPOSED STANDARD Source : Softwires Area : Internet Stream : IETF Verifying Party : IESG _______________________________________________ Softwires mailing list [email protected] https://www.ietf.org/mailman/listinfo/softwires
