devfsadm will do the magic.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 02, 2003 4:05 PM To: [EMAIL PROTECTED] Subject: [Solaris-Users] Reset the counter of Logical device files Hi, I have two E450s (Solaris 8) with Veritas Cluster. I have 14 Fibre Channel Tape Drives. These FC Tape Drives are connected with 4 JNI HBAs (PCI-1063 - two per node) on my Cluster. For my Veritas Cluster I should have the same logical device files on both E450s (ideally from /dev/rmt/0cbn to /dev/rmt/13cbn). Currently my second node own the logical devices files form /dev/rmt/16cbn to /dev/rmt/29cbn. I would like to know if it's possible to "reset" the counter so that my logical device files will start at 0cbn and finish at 13cbn. In advance thanks for your answer. Stephane _______________________________________________ Solaris-Users mailing list [EMAIL PROTECTED] http://www.filibeto.org/mailman/listinfo/solaris-users _______________________________________________ Solaris-Users mailing list [EMAIL PROTECTED] http://www.filibeto.org/mailman/listinfo/solaris-users
