Hello Pravin,
Friday, December 24, 2004, 11:01:19 AM, you wrote:
[cut]
>> bring the system to single user mode, so no one is using and noone is
>> logging: init S
PPKGH> 1. As long as all applications that uses /logs been
PPKGH> stopped, is it still necessary to run this procedure in single
PPKGH> user mode? The reason I am asking is, I will test this
PPKGH> procedure in the Lab first and then I need to apply it to the
PPKGH> Customer site remotely.
Probably you don't need to bring system to single user mode in that case.
But it's always a good idea to do such operations in Single user.
>> Now you have to grow the FSes format, then edit slice table and
>> enlarge s4 on both drives ( c1t0d0s4 and c1t1d0s4 ) after that
>> growfs both FSes.
PPKGH> 2. Here I will be enlarging s4 at the cost of reducing
PPKGH> s5, which is fine since it is unused. After updating the
PPKGH> partition table for s4 and s5, should I need to run growfs as
PPKGH> follows (note that df -k output for /logs is: /dev/md/dsk/d4
PPKGH> 1983119 29304 1894322 2% /logs)
PPKGH> growfs -M /logs /dev/rdsk/d4
PPKGH> growfs -M /logs /dev/dsk/d4
PPKGH> What exactly FSes meant for?
FSes= FileSystems , sorry that I don't explained it.
At this stage you do not have metadevice /dev/dsk/d4 defined, so
commands like these will not work.
Growfs should be:
growfs /dev/rdsk/c0t0d0s4
growfs /dev/rdsk/c0t1d0s4
As you are expanding the two slices that later will become submirrors
of your mirror.
PPKGH> Happy Holidays!
Happy Holidays to you too!
PPKGH> Regards,
PPKGH> Pravin
--
Peter Kirkov
Support Engineer
________________________________________________
ACT Sofia
Tzarigradsko shosse blvd. 7km
BIC-IZOT, Office 710-714 Tel: +359-2-9718354
1113 Sofia - Bulgaria Fax: +359-2-9718343
mobile: +359-889-919638
mailto:[EMAIL PROTECTED]
_______________________________________________
Solaris-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/solaris-users
