Bernie Clear wrote:
I have an Ultra 60 and a Ultra 10 both running Solaris 10 with
openboot 3.11 . I would like to patch both to openboot 3.27 or higher.
I have downloaded the latest prom updates from sunsolve. After coping
the files to the root directory,shutting down the systems, moving the
jumper and restarting. I type boot disk /flash-update-Ultra60-latest I
get the following errors: can't read or open
/flash-update-Ultra60-latest Fast Data access mmu on both machines(of
course on the ultra10 I type boot disk /flash-update-Ultra510-latest.
I have done some research and found hints to do the following:
ok setenv auto-boot? false
ok reset-all and then when ok show sup try boot the device again.That
didn't seem to fix the issue. Anyone have any idea of what I should
try next?
p.s. I have no issue booting into Solaris 10 just running the flash.
hi Bernie,
for the ultra60 you can try copying the binary file from the patch
directory: flash-update-Ultra60-09 to "/" as flash-update-Ultra60-latest
is in fact a symlink to it (or you can check that
/flash-update-Ultra60-latest is indeed the correct binary file). then
try booting again and see if it works:
$file /flash-update-Ultra60-09
flash-update-Ultra60-09: ELF 32-bit MSB executable SPARC32PLUS
Version 1, V8+ Required, statically linked, stripped
$digest -a md5 /flash-update-Ultra60-09
96d865469f2a7107f5d43713f5d974e9
boot disk /flash-update-Ultra60-09
if it works than do the same for the ultra 10.
hope this helps.
greetings,
Stoyan Angelov
_______________________________________________
Solaris-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/solaris-users
