Jeff, First of all, do an upgrade on both boxes to firmware 6.3.x.0
VPN on 6.2.x.x is, at best, shaky and forward/backward incompatible. Then get back to us with a status. /jesper -----Original Message----- From: Jeff Vogt [mailto:[EMAIL PROTECTED]] Sent: 10. juni 2002 23:23 To: 'Sonicwall (E-mail) Subject: [SonicWALL]- disable sec association Hi all, just set up a vpn between the soho3 and the tele3, firmware version 6.2. After getting this set up, I wanted to disable the security association that I had created for myself, but leave it intact if the customer needs my help in the future. After everything had been set up and working, I walked the customer through disabling my sa (customer was at his remote site). After he disabled my sa, the vpn connectivity was lost for his sa as well (even after restarting the host site sonicwall). My first thought was that he had just disabled the wrong sa, but that is not the case. I called SW tech support, but they were not able to offer any additional suggestions. Has anyone run into this issue before and knows how to solve it? the host site has fixed IP and the remote site is dhcp assigned. thanks Jeff --- [This E-mail scanned for viruses by Declude/F-Prot AV] ======================================================================== =========================== To unsubscribe, send email to [EMAIL PROTECTED] In the body of the email put the following: unsubscribe sonicwall your_name The archive of this list is at http://www.mail-archive.com/sonicwall%40peake.com/ --- [This E-mail scanned for viruses by Declude/F-Prot AV] ==================================================================================================To unsubscribe, send email to [EMAIL PROTECTED] In the body of the email put the following: unsubscribe sonicwall your_name The archive of this list is at http://www.mail-archive.com/sonicwall%40peake.com/
