Hi, we have a Pro 300 that is plugged into a Cisco Switch. On this Cisco switch we also have a Pro100. The internet router is also plugged into this Cisco switch.
we have a webserver on the DMZ of the Pro300. It is in standard mode. If I try to access the webserver from a PC that is behind the Pro100, I am unable to do so. I can access a variety of sites on the internet from a PC behind the Pro100 just fine. The default gateway on the Pro100 is our internet router. On the Pro100 intranet tab of the Advanced menu, we added the full IP address range under the "specified address range are attached to the WAN link" On the Pro300 intranet tab of the Advanced menu, we added the WAN IP address of the Pro100. If you plug a PC into the switch and configure it with a public address and use the internet router as a gateway, you can pull up the webserver just fine. What am I missing or did wrong? Thanks! Paul Mills IT Coordinator Heritage Trail Library System [EMAIL PROTECTED] 815-729-3345 x120 Heritage Trail Library System serves as a catalyst for innovative leadership through collaboration, education, and advocacy. --- [This E-mail scanned for viruses by Declude/F-Prot AV] =================================================================================================== To unsubscribe, send email to [EMAIL PROTECTED] In the body of the email put the following: unsubscribe sonicwall your_name The archive of this list is at http://www.mail-archive.com/sonicwall%40peake.com/
