Mark Kettenis <[email protected]> writes:
> CVSROOT: /cvs
> Module name: src
> Changes by: [email protected] 2013/03/25 13:50:56
>
> Modified files:
> sys/dev/pci/drm/i915: i915_drv.c i915_drv.h
>
> Log message:
> Use the new rasops multiple screen support to provide proper virtual
> terminals.
Quick tests show that console switching works fine here on 945GME.
Scrolling in xterm and video layback aren't that fast, but I haven't
upgraded to the new libdrm yet.
dmesg and Xorg.0.log inline
OpenBSD 5.3-current (GENERIC) #0: Mon Mar 25 23:37:10 CET 2013
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 1063645184 (1014MB)
avail mem = 1034846208 (986MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/08/09, BIOS32 rev. 0 @ 0xfd5f0, SMBIOS
rev. 2.5 @ 0xdf010 (36 entries)
bios0: vendor Phoenix Technologies Ltd. version "11CA.M015.20090908.RHU" date
09/08/2009
bios0: SAMSUNG ELECTRONICS CO., LTD. NC10
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG TCPA TMOR APIC BOOT SLIC SSDT SSDT SSDT
acpi0: wakeup devices HDEF(S4) PXS1(S4) PXS2(S4) PXS3(S4) SLT0(S4) SLT1(S4)
SLT2(S4) SLT3(S4) SLT6(S4) LANC(S4) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 4 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C1, PSS
acpipwrres0 at acpi0: FN00
acpitz0 at acpi0: critical temperature is 98 degC
acpibat0 at acpi0: BAT1 type LION oem "SAMSUNG Electronics"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD04
bios0: ROM list: 0xc0000/0xec00! 0xdf000/0x1000! 0xe0000/0x1800!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: apic 1 int 16
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC272
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
pci1 at ppb0 bus 2
iwn0 at pci1 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R,
MoW, address 00:21:6a:xx:xx:xx
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
pci2 at ppb1 bus 3
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8040" rev 0x13, Yukon-2 FE+
rev. A0 (0x0): apic 1 int 18
msk0 at mskc0 port A: address 00:24:54:xx:xx:xx
eephy0 at msk0 phy 0: 88E3016 10/100 PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1600BEVT-22ZCT0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Vimicro Corp. Namuga 1.3M
Webcam" rev 2.00/1.00 addr 2
video0 at uvideo0
ugen0 at uhub2 port 2 "Broadcom Corp BCM2046 Bluetooth Device" rev 2.00/8.47
addr 2
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (4d22afc00f031182.a) swap on wd0b dump on wd0b
video0 detached
uvideo0 detached
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Vimicro Corp. Namuga 1.3M
Webcam" rev 2.00/1.00 addr 2
video0 at uvideo0
ugen0 detached
ugen0 at uhub2 port 2 "Broadcom Corp BCM2046 Bluetooth Device" rev 2.00/8.47
addr 2
[ 3897.892] (--) checkDevMem: using aperture driver /dev/xf86
[ 3898.100] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode
(version 3.32)
[ 3898.112]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 3898.112] X Protocol Version 11, Revision 0
[ 3898.112] Build Operating System: OpenBSD 5.3 i386
[ 3898.112] Current Operating System: OpenBSD moo.wxcvbn.org 5.3 GENERIC#0 i386
[ 3898.113] Build Date: 22 March 2013 03:30:07PM
[ 3898.113]
[ 3898.114] Current version of pixman: 0.28.0
[ 3898.114] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3898.114] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3898.115] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 26 10:00:46
2013
[ 3898.137] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 3898.138] (==) No Layout section. Using the first Screen section.
[ 3898.138] (==) No screen section available. Using defaults.
[ 3898.138] (**) |-->Screen "Default Screen Section" (0)
[ 3898.138] (**) | |-->Monitor "<default monitor>"
[ 3898.140] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3898.140] (==) Disabling SIGIO handlers for input devices
[ 3898.140] (==) Automatically adding devices
[ 3898.140] (==) Automatically enabling devices
[ 3898.141] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 3898.141] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 3898.141] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 3898.141] (II) Loader magic: 0x3c0257c0
[ 3898.141] (II) Module ABI versions:
[ 3898.141] X.Org ANSI C Emulation: 0.4
[ 3898.141] X.Org Video Driver: 12.0
[ 3898.141] X.Org XInput driver : 16.0
[ 3898.141] X.Org Server Extension : 6.0
[ 3898.142] (--) PCI:*(0:0:2:0) 8086:27ae:144d:ca00 rev 3, Mem @
0xf0000000/524288, 0xd0000000/268435456, 0xf0300000/262144, I/O @ 0x00001800/8
[ 3898.142] (--) PCI: (0:0:2:1) 8086:27a6:144d:ca00 rev 3, Mem @
0xf0080000/524288
[ 3898.142] (II) LoadModule: "extmod"
[ 3898.148] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[ 3898.149] (II) Module extmod: vendor="X.Org Foundation"
[ 3898.149] compiled for 1.12.3, module version = 1.0.0
[ 3898.149] Module class: X.Org Server Extension
[ 3898.149] ABI class: X.Org Server Extension, version 6.0
[ 3898.149] (II) Loading extension MIT-SCREEN-SAVER
[ 3898.149] (II) Loading extension XFree86-VidModeExtension
[ 3898.149] (II) Loading extension XFree86-DGA
[ 3898.150] (II) Loading extension DPMS
[ 3898.150] (II) Loading extension XVideo
[ 3898.150] (II) Loading extension XVideo-MotionCompensation
[ 3898.150] (II) Loading extension X-Resource
[ 3898.150] (II) LoadModule: "dbe"
[ 3898.154] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[ 3898.155] (II) Module dbe: vendor="X.Org Foundation"
[ 3898.155] compiled for 1.12.3, module version = 1.0.0
[ 3898.156] Module class: X.Org Server Extension
[ 3898.156] ABI class: X.Org Server Extension, version 6.0
[ 3898.156] (II) Loading extension DOUBLE-BUFFER
[ 3898.156] (II) LoadModule: "glx"
[ 3898.161] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 3898.162] (II) Module glx: vendor="X.Org Foundation"
[ 3898.162] compiled for 1.12.3, module version = 1.0.0
[ 3898.162] ABI class: X.Org Server Extension, version 6.0
[ 3898.162] (==) AIGLX enabled
[ 3898.162] (II) Loading extension GLX
[ 3898.163] (II) LoadModule: "record"
[ 3898.168] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[ 3898.169] (II) Module record: vendor="X.Org Foundation"
[ 3898.169] compiled for 1.12.3, module version = 1.13.0
[ 3898.169] Module class: X.Org Server Extension
[ 3898.169] ABI class: X.Org Server Extension, version 6.0
[ 3898.169] (II) Loading extension RECORD
[ 3898.169] (II) LoadModule: "dri"
[ 3898.174] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[ 3898.176] (II) Module dri: vendor="X.Org Foundation"
[ 3898.176] compiled for 1.12.3, module version = 1.0.0
[ 3898.176] ABI class: X.Org Server Extension, version 6.0
[ 3898.176] (II) Loading extension XFree86-DRI
[ 3898.176] (II) LoadModule: "dri2"
[ 3898.181] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 3898.182] (II) Module dri2: vendor="X.Org Foundation"
[ 3898.182] compiled for 1.12.3, module version = 1.2.0
[ 3898.182] ABI class: X.Org Server Extension, version 6.0
[ 3898.183] (II) Loading extension DRI2
[ 3898.183] (==) Matched intel as autoconfigured driver 0
[ 3898.183] (==) Matched vesa as autoconfigured driver 1
[ 3898.183] (==) Assigned the driver to the xf86ConfigLayout
[ 3898.183] (II) LoadModule: "intel"
[ 3898.185] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 3898.191] (II) Module intel: vendor="X.Org Foundation"
[ 3898.191] compiled for 1.12.3, module version = 2.20.19
[ 3898.191] Module class: X.Org Video Driver
[ 3898.191] ABI class: X.Org Video Driver, version 12.0
[ 3898.191] (II) LoadModule: "vesa"
[ 3898.196] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 3898.197] (II) Module vesa: vendor="X.Org Foundation"
[ 3898.197] compiled for 1.12.3, module version = 2.3.2
[ 3898.197] Module class: X.Org Video Driver
[ 3898.197] ABI class: X.Org Video Driver, version 12.0
[ 3898.197] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 3898.200] (II) VESA: driver for VESA chipsets: vesa
[ 3898.200] drmOpenDevice: node name is /dev/drm0
[ 3898.201] drmOpenDevice: open result is 10, (OK)
[ 3898.201] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 3898.201] drmOpenDevice: node name is /dev/drm0
[ 3898.202] drmOpenDevice: open result is 10, (OK)
[ 3898.202] drmOpenByBusid: drmOpenMinor returns 10
[ 3898.202] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 3898.202] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 3898.203] drmOpenDevice: node name is /dev/drm0
[ 3898.203] drmOpenDevice: open result is 10, (OK)
[ 3898.203] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 3898.203] drmOpenDevice: node name is /dev/drm0
[ 3898.203] drmOpenDevice: open result is 10, (OK)
[ 3898.203] drmOpenByBusid: drmOpenMinor returns 10
[ 3898.204] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 3898.204] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 3898.204] (WW) Falling back to old probe method for vesa
[ 3898.204] drmOpenDevice: node name is /dev/drm0
[ 3898.205] drmOpenDevice: open result is 10, (OK)
[ 3898.205] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 3898.205] drmOpenDevice: node name is /dev/drm0
[ 3898.205] drmOpenDevice: open result is 10, (OK)
[ 3898.205] drmOpenByBusid: drmOpenMinor returns 10
[ 3898.205] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 3898.205] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 3898.206] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 3898.206] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3898.206] (==) intel(0): RGB weight 888
[ 3898.206] (==) intel(0): Default visual is TrueColor
[ 3898.206] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 3898.207] (**) intel(0): Relaxed fencing disabled
[ 3898.207] (**) intel(0): Wait on SwapBuffers? enabled
[ 3898.207] (**) intel(0): Triple buffering? enabled
[ 3898.207] (**) intel(0): Framebuffer tiled
[ 3898.207] (**) intel(0): Pixmaps tiled
[ 3898.207] (**) intel(0): 3D buffers tiled
[ 3898.207] (**) intel(0): SwapBuffers wait enabled
[ 3898.207] (==) intel(0): video overlay key set to 0x101fe
[ 3898.208] (II) intel(0): Output LVDS1 has no monitor section
[ 3898.234] (II) intel(0): Output VGA1 has no monitor section
[ 3898.235] (II) intel(0): EDID for output LVDS1
[ 3898.235] (II) intel(0): Manufacturer: LGD Model: 295 Serial#: 0
[ 3898.235] (II) intel(0): Year: 2009 Week: 0
[ 3898.235] (II) intel(0): EDID Version: 1.3
[ 3898.235] (II) intel(0): Digital Display Input
[ 3898.235] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 3898.235] (II) intel(0): Gamma: 2.20
[ 3898.235] (II) intel(0): No DPMS capabilities specified
[ 3898.235] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3898.235] (II) intel(0): First detailed timing is preferred mode
[ 3898.235] (II) intel(0): redX: 0.591 redY: 0.352 greenX: 0.335 greenY:
0.550
[ 3898.235] (II) intel(0): blueX: 0.154 blueY: 0.120 whiteX: 0.313 whiteY:
0.329
[ 3898.235] (II) intel(0): Manufacturer's mask: 0
[ 3898.235] (II) intel(0): Supported detailed timing:
[ 3898.235] (II) intel(0): clock: 50.8 MHz Image Size: 224 x 126 mm
[ 3898.235] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1104
h_blank_end 1344 h_border: 0
[ 3898.235] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 609
v_blanking: 630 v_border: 0
[ 3898.235] (II) intel(0): LG Display
[ 3898.236] (II) intel(0): Monitor name: LP101WSA-TLN1
[ 3898.236] (II) intel(0): EDID (in hex):
[ 3898.236] (II) intel(0): 00ffffffffffff0030e4950200000000
[ 3898.236] (II) intel(0): 0013010380160d780a4fb5975a558c27
[ 3898.236] (II) intel(0): 1e505400000001010101010101010101
[ 3898.236] (II) intel(0): 010101010101d813004041581e203020
[ 3898.236] (II) intel(0): 3600e07e000000190000000000000000
[ 3898.236] (II) intel(0): 00000000000000000000000000fe004c
[ 3898.236] (II) intel(0): 4720446973706c61790a2020000000fc
[ 3898.236] (II) intel(0): 004c503130315753412d544c4e31001f
[ 3898.236] (II) intel(0): EDID vendor "LGD", prod id 661
[ 3898.236] (II) intel(0): Printing DDC gathered Modelines:
[ 3898.236] (II) intel(0): Modeline "1024x600"x0.0 50.80 1024 1072 1104
1344 600 603 609 630 -hsync -vsync (37.8 kHz eP)
[ 3898.238] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 3898.238] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 3898.238] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 3898.238] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 3898.238] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 3898.239] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 3898.239] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 3898.239] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 3898.239] (II) intel(0): Printing probed modes for output LVDS1
[ 3898.239] (II) intel(0): Modeline "1024x600"x60.0 50.80 1024 1072 1104
1344 600 603 609 630 -hsync -vsync (37.8 kHz eP)
[ 3898.239] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3898.239] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 3898.239] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3898.266] (II) intel(0): EDID for output VGA1
[ 3898.266] (II) intel(0): Output LVDS1 connected
[ 3898.266] (II) intel(0): Output VGA1 disconnected
[ 3898.266] (II) intel(0): Using exact sizes for initial modes
[ 3898.266] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 3898.266] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 3898.266] (II) intel(0): Kernel page flipping support detected, enabling
[ 3898.266] (**) intel(0): Display dimensions: (220, 130) mm
[ 3898.266] (**) intel(0): DPI set to (118, 117)
[ 3898.266] (II) Loading sub module "fb"
[ 3898.266] (II) LoadModule: "fb"
[ 3898.273] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 3898.276] (II) Module fb: vendor="X.Org Foundation"
[ 3898.276] compiled for 1.12.3, module version = 1.0.0
[ 3898.276] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3898.276] (II) Loading sub module "dri2"
[ 3898.276] (II) LoadModule: "dri2"
[ 3898.282] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[ 3898.282] (II) Module dri2: vendor="X.Org Foundation"
[ 3898.282] compiled for 1.12.3, module version = 1.2.0
[ 3898.282] ABI class: X.Org Server Extension, version 6.0
[ 3898.282] (II) UnloadModule: "vesa"
[ 3898.282] (II) Unloading vesa
[ 3898.283] (==) Depth 24 pixmap format is 32 bpp
[ 3898.283] (II) intel(0): [DRI2] Setup complete
[ 3898.283] (II) intel(0): [DRI2] DRI driver: i915
[ 3898.283] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096,
tiled
[ 3898.284] (II) UXA(0): Driver registered support for the following
operations:
[ 3898.284] (II) solid
[ 3898.284] (II) copy
[ 3898.284] (II) composite (RENDER acceleration)
[ 3898.284] (II) put_image
[ 3898.284] (II) get_image
[ 3898.284] (==) intel(0): Backing store disabled
[ 3898.285] (==) intel(0): Silken mouse disabled
[ 3898.285] (II) intel(0): Initializing HW Cursor
[ 3898.285] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 3898.287] (==) intel(0): DPMS enabled
[ 3898.287] (==) intel(0): Intel XvMC decoder disabled
[ 3898.287] (II) intel(0): Set up textured video
[ 3898.287] (II) intel(0): Set up overlay video
[ 3898.287] (II) intel(0): direct rendering: DRI2 Enabled
[ 3898.332] (--) RandR disabled
[ 3898.332] (II) Initializing built-in extension Generic Event Extension
[ 3898.332] (II) Initializing built-in extension SHAPE
[ 3898.332] (II) Initializing built-in extension MIT-SHM
[ 3898.332] (II) Initializing built-in extension XInputExtension
[ 3898.332] (II) Initializing built-in extension XTEST
[ 3898.332] (II) Initializing built-in extension BIG-REQUESTS
[ 3898.332] (II) Initializing built-in extension SYNC
[ 3898.332] (II) Initializing built-in extension XKEYBOARD
[ 3898.332] (II) Initializing built-in extension XC-MISC
[ 3898.332] (II) Initializing built-in extension SECURITY
[ 3898.332] (II) Initializing built-in extension XINERAMA
[ 3898.332] (II) Initializing built-in extension XFIXES
[ 3898.332] (II) Initializing built-in extension RENDER
[ 3898.332] (II) Initializing built-in extension RANDR
[ 3898.332] (II) Initializing built-in extension COMPOSITE
[ 3898.332] (II) Initializing built-in extension DAMAGE
[ 3898.504] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3898.504] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3898.504] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3898.504] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 3898.504] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3898.505] (II) AIGLX: Loaded and initialized i915
[ 3898.505] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3898.511] (II) intel(0): Setting screen physical size to 270 x 158
[ 3899.656] (II) config/wscons: checking input device /dev/wskbd
[ 3899.656] (II) wskbd: using layout fr
[ 3899.656] (II) LoadModule: "kbd"
[ 3899.663] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 3899.664] (II) Module kbd: vendor="X.Org Foundation"
[ 3899.664] compiled for 1.12.3, module version = 1.6.2
[ 3899.664] Module class: X.Org XInput Driver
[ 3899.664] ABI class: X.Org XInput driver, version 16.0
[ 3899.664] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 3899.664] (**) /dev/wskbd: always reports core events
[ 3899.664] (**) /dev/wskbd: always reports core events
[ 3899.665] (**) Option "Protocol" "standard"
[ 3899.665] (**) Option "XkbRules" "base"
[ 3899.665] (**) Option "XkbModel" "pc105"
[ 3899.665] (**) Option "XkbLayout" "fr"
[ 3899.665] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 3900.308] (II) config/wscons: checking input device /dev/wsmouse0
[ 3900.308] (II) LoadModule: "synaptics"
[ 3900.315] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[ 3900.317] (II) Module synaptics: vendor="X.Org Foundation"
[ 3900.317] compiled for 1.12.3, module version = 1.6.2
[ 3900.317] Module class: X.Org XInput Driver
[ 3900.317] ABI class: X.Org XInput driver, version 16.0
[ 3900.317] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[ 3900.317] (**) /dev/wsmouse0: always reports core events
[ 3900.317] (**) Option "Device" "/dev/wsmouse0"
[ 3901.220] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5878 resolution
89
[ 3901.220] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 5888 resolution
249
[ 3901.220] (**) /dev/wsmouse0: always reports core events
[ 3901.220] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type:
TOUCHPAD, id 7)
[ 3901.221] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant
deceleration 2.5
[ 3901.221] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75
[ 3901.221] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.032
[ 3901.222] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 3901.223] (**) /dev/wsmouse0: (accel) acceleration profile 1
[ 3901.223] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 3901.223] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 3901.675] (II) config/wscons: checking input device /dev/wsmouse
[ 3901.675] (II) LoadModule: "ws"
[ 3901.682] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 3901.683] (II) Module ws: vendor="X.Org Foundation"
[ 3901.683] compiled for 1.12.3, module version = 1.3.0
[ 3901.683] Module class: X.Org XInput Driver
[ 3901.683] ABI class: X.Org XInput driver, version 16.0
[ 3901.683] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 3901.683] (**) /dev/wsmouse: always reports core events
[ 3901.684] (II) ws: /dev/wsmouse: debuglevel 0
[ 3901.684] (**) Option "Device" "/dev/wsmouse"
[ 3901.684] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 3901.684] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 3901.684] (**) ws: /dev/wsmouse: associated screen: 0
[ 3901.684] (II) ws: /dev/wsmouse: minimum x position: 0
[ 3901.684] (II) ws: /dev/wsmouse: maximum x position: 1023
[ 3901.685] (II) ws: /dev/wsmouse: minimum y position: 0
[ 3901.685] (II) ws: /dev/wsmouse: maximum y position: 599
[ 3901.685] (==) ws: /dev/wsmouse: Buttons: 7
[ 3901.685] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 3901.685] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 8)
[ 3901.686] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 3901.686] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 3901.686] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 3901.686] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 3910.053] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3913.872] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3913.890] (II) intel(0): EDID vendor "LGD", prod id 661
[ 3913.890] (II) intel(0): Printing DDC gathered Modelines:
[ 3913.890] (II) intel(0): Modeline "1024x600"x0.0 50.80 1024 1072 1104
1344 600 603 609 630 -hsync -vsync (37.8 kHz eP)
