CVSROOT: /cvs
Module name: src
Changes by: [email protected] 2017/01/23 22:29:22
Modified files:
distrib/armv7/miniroot: boot.cmd
distrib/armv7/ramdisk: install.md
Log message:
There are two u-boot targets which should work with the sabre lite
boards. mx6qsabrelite (which sets fdt_addr) and nitrogen6q
(which sets fdtaddr). The difference seems to be the mx6qsabrelite
target uses a small loader in SPI connected flash which will load
the rest of u-boot from an SD card. The nitrogen6q target normally
loads all of u-boot from an image in flash and then searches for a
6x_bootscript file with u-boot commands on MMC and SATA.
While neither of them supports "Generic Distro Configuration" which
would automatically search for an EFI image, if they did fdt_addr
is intended to be used for a DTB in ROM, while fdt_addr_r is intended
to be used for a DTB in RAM.
Change the 6x_bootscript u-boot commands to load the DTB to
fdtaddr instead of fdt_addr as matthieu@ reported fdt_addr was not
present in the u-boot environment on his system.
