Forget about my message, this is normal behavior, firt page show the number of incorrect config files!
2012/4/13 Pierre Casenove <[email protected]>: > Hello list, > Here is my setup: > SW 1.7 with pgsql on RHEL 5 Server x64. > I've created two configuration channels: one with 3 files in it (chan > A) and the other with only one file in it (chan B). > I've also created two activation key : > - key A associated to the two config channel (rank 1 for chan B and > rank 2 for chan A) > - key B associated with only config channal chan A (the one with 3 files in > it) > > And I've registered one system using the first key, and another using > the second. > > Now, the issue: > When going to page Systems --> All, I get the page with the list of my > registered systems. > For the system activated with the key A (with 2 channels), the column > "Configs" shows 0, as if no file were applicable. I expected to see > "4" instead. > For the system activated with the key B (with 1 channel), the column > "Configs" shows 3, as expected. > > And when I am going in the details of the system registered with key > A, and click on link "Configuration", I get this: > Centrally-Managed Configuration: Total: 4 files > Which is what I expected to see on the summary page as well. > > I hope I'm clear! > > Where could be the problem? I suspect an incorrect PGSQL request but I > don't have any guess in fact! > > Thanks in advance for the help, > > Pierre _______________________________________________ Spacewalk-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/spacewalk-list
