Hello, thanks for your answer ! Sorry for my mistake, I exported the RHN-ORG-TRUSTED-SSL-CERT but I wrote RHN-CA-CERT. I double checked after your comment, and I have the good CA in my ISS configuration.
Server "spwlk02" is the slave server. I try to pull from Slave to Master. By the way the only opened network flow opened is from slave to master on TCP 443. I will check in the spacewalk logs for ISS stuff, I did not seen any dedicated log file for ISS ? Regards, Tony -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Michael Mraka Sent: mardi 7 octobre 2014 14:15 To: [email protected] Subject: Re: [Spacewalk-list] Spacewalk 2.2 issue with ISS Tony Dufour wrote: % Anyone to give a hand with ISS ? % Any kind of idea will be appreciated. % % Thanks a lot, % % Tony % ... % I have an issue while implementing ISS on my new Spacewalk 2.2 servers. % Note that it was working well with my old Spacewalk 2.0 servers; I just re-installed the two servers with RHEL 6.5 and Spacewalk 2.2, instead of RHEL 5.10 and Spacewalk 2.0, but the hardware, network and IP configuration did not change at all. % I checked the name resolution on both hosts, and network flow from Slave to Master (TCP 443), and all is OK. % % I followed the following guide to configure one master and one slave with default master: % https://fedorahosted.org/spacewalk/wiki/ISSSyncPermissions % (I exported manually the RHN-CA-CERT from Master to Slave) Hi Tony, Is RHN-CA-CERT really a cert file of your master? It sounds more like cert file of rhn.redhat.com site. Spacewalk cert is typically in RHN-ORG-TRUSTED-SSL-CERT. % On my slave Spacewalk, on WebUI, in admin > ISS > Slave, I can see the exported organization from my master, so I guess the configuration is correct. % % By the way, when I perform a "satellite-sync --list-channels" command, I have the following error: % % ERROR: There was a problem communicating with the ISS Master. % Depending on the specific error details, please review your configuration, % basic network connectivity, and/or name resolution, and try again. % Error message: % Error Message: % Server "spwlk02" is not enabled for ISS. spwlk02 is master or slave server? Sync should be initiated on slave side (pulling data from master). % Error Class Code: 2004 % Error Class Info: % This satellite server is not allowed to use Inter Satellite Sync on this satellite % Explanation: % An error has occurred while processing your request. If this problem % persists please enter a bug report at bugzilla.redhat.com. % If you choose to submit the bug report, please be sure to include % details of what you were trying to do when this error occurred and % details on how to reproduce this problem. % % Can someone assists me to have my ISS working back ? % % Thanks in advance and regards, % % Tony Dufour You can also check log in /var/log/rhn/ both on master and slave if there's something suspicious. Regards, -- Michael Mráka Satellite Engineering, Red Hat _______________________________________________ Spacewalk-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/spacewalk-list ________________________________ This message and any attachments are intended solely for the addressees and may contain confidential information. Any unauthorized use or disclosure, either whole or partial, is prohibited. E-mails are susceptible to alteration. Our company shall not be liable for the message if altered, changed or falsified. If you are not the intended recipient of this message, please delete it and notify the sender. Although all reasonable efforts have been made to keep this transmission free from viruses, the sender will not be liable for damages caused by a transmitted virus. _______________________________________________ Spacewalk-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/spacewalk-list
