I changed the value today to about 10 MB. The value was about 250 MB before.
> I still don't know anything about simscan, but my first idea is to try > raising your "softlimit" number. It's currently set to 10000000 (9.54 > MB), which might be too low for running spamdyke, ClamAV and > SpamAssassin at the same time. Try raising it to something silly (like > 100 MB), restarting qmail and testing SpamAssassin again. If that fixes > your problem, you can try lowering that number (slowly) to find a > reasonable limit. > > -- Sam Clippinger > > [EMAIL PROTECTED] wrote: >> thanks for your answers. >> >> first of all i would like to say, that simscan works also with spamdyke, >> but when i add spamdyke to my run-script, simscan skip only >> spamassassin. >> and i don't know the reason. >> >> My simscan-configuration looks like: >> >> ./configure \ >> --enable-user=simscan \ >> --enable-clamav=y \ >> --enable-clamdscan=/usr/local/bin/clamdscan \ >> --enable-custom-smtp-reject=n \ >> --enable-per-domain=y \ >> --enable-attach=y \ >> --enable-dropmsg=n \ >> --enable-spam=y \ >> --enable-spam-passthru=n \ >> --enable-spamc-user=y \ >> --enable-spam-hits=7 \ >> --enable-spamc=/usr/local/bin/spamc \ >> --enable-qmaildir=/var/qmail \ >> --enable-workdir=/var/qmail/simscan \ >> --enable-controldir=/var/qmail/control \ >> --enable-quarantinedir=/var/qmail/quarantine \ >> --enable-qmail-queue=/var/qmail/bin/qmail-queue \ >> --enable-ripmime=/usr/local/bin/ripmime \ >> --enable-received=y \ >> --enable-spamassassin-path=/usr/local/bin/spamassassin \ >> --enable-clamavdb-path=/usr/local/share/clamav \ >> --enable-sigtool-path=/usr/local/bin/sigtool \ >> --enable-regex=y >> >> My qmail-smtpd-run-script looks like: >> >> #!/bin/sh >> >> QMAILDUID=`id -u vpopmail` >> NOFILESGID=`id -g vpopmail` >> MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` >> LOCAL=`head -1 /var/qmail/control/me` >> if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" -o -z >> "$LOCAL" >> ]; then >> echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in >> echo /var/qmail/supervise/qmail-smtpd/run >> exit 1 >> fi >> if [ ! -f /var/qmail/control/rcpthosts ]; then >> echo "No /var/qmail/control/rcpthosts!" >> echo "Refusing to start SMTP listener because it'll create an open >> relay" >> exit 1 >> fi >> exec /usr/local/bin/softlimit -m 10000000 \ >> /usr/local/bin/tcpserver -v -R -l "$LOCAL" -x /etc/tcp.smtp.cdb -c >> "$MAXSMTPD" \ >> -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp \ >> /usr/local/bin/spamdyke -f /usr/local/etc/spamdyke.conf \ >> /var/qmail/bin/qmail-smtpd /home/vpopmail/bin/vchkpw /usr/bin/true 2>&1 >> >> As I said, i activate simscan by adding >> ":allow,QMAILQUEUE="/var/qmail/bin/simscan" to my /etc/tcp.smtp. >> >> My /var/qmail/control/simcontrol file looks like: >> >> :clam=yes,spam=yes,spam_hits=7 >> >> Don't hesitate if you need more infos ;-) >> >> >> >>> The qmail-toaster (http://qmailtoaster.org) implements these together >>> just fine, so it *is* possible. ;) >>> >>> As Sam said, with a little more info about your configuration I'm >>> expect >>> we can help get you running properly. >>> >>> Sam Clippinger wrote: >>> >>>> I'm not familiar enough with simscan to give any good advice here, but >>>> spamdyke should work fine with simscan. The FAQ only mentions >>>> qmail-scanner because that's what I use and it documents a small bug I >>>> found. >>>> >>>> Perhaps if you could post your "run" script and more information about >>>> your simscan configuration, someone here may be able to help. >>>> >>>> -- Sam Clippinger >>>> >>>> Bernd Hoffmann wrote: >>>> >>>>> Hello, >>>>> >>>>> I use netqmail 1.06 with tls-smtpauth-patch. I implement clamav and >>>>> spamassassin with simscan by add >>>>> :allow,QMAILQUEUE="/var/qmail/bin/simscan" >>>>> to my /etc/tcp.smtp. >>>>> >>>>> When I enable spamdyke by adding "/usr/local/bin/spamdyke -f >>>>> /usr/local/etc/spamdyke.conf" to my qmail-smtpd-run-script, simscan >>>>> skip the >>>>> spamassassin-scan. >>>>> >>>>> I don't want to use the qmail-scanner >>>>> (http://www.spamdyke.org/documentation/FAQ.html#TROUBLE5). That can >>>>> not >>>>> be >>>>> the solution!? >>>>> >>>>> How can I encourage simscan to use spamassassin together with >>>>> spamdyke? >>>>> >>>>> Can somebody explain me, what's the problem? >>>>> >>>>> Thanks in advance. >>>>> >>>>> Best regards, >>>>> >>>>> Bernd >>>>> >>>>> _______________________________________________ >>>>> spamdyke-users mailing list >>>>> [email protected] >>>>> http://www.spamdyke.org/mailman/listinfo/spamdyke-users >>>>> >>>>> >>> -- >>> -Eric 'shubes' >>> >>> _______________________________________________ >>> spamdyke-users mailing list >>> [email protected] >>> http://www.spamdyke.org/mailman/listinfo/spamdyke-users >>> >>> >> >> >> >> ----------------------------------------- >> e-Mailservice powered by Internetagentur Schott >> http://www.internetagentur-schott.de/ >> _______________________________________________ >> spamdyke-users mailing list >> [email protected] >> http://www.spamdyke.org/mailman/listinfo/spamdyke-users >> > _______________________________________________ > spamdyke-users mailing list > [email protected] > http://www.spamdyke.org/mailman/listinfo/spamdyke-users > ----------------------------------------- e-Mailservice powered by Internetagentur Schott http://www.internetagentur-schott.de/ _______________________________________________ spamdyke-users mailing list [email protected] http://www.spamdyke.org/mailman/listinfo/spamdyke-users
