Need help getting an Expert3D-lite framebuffer working under accelerated
mode, preferably in 24bits. 

Been working over the last few months on moving my Blade 1000 workstation
with an Expert3D-lite video card from Solaris 10 to OpenBSD.  Followed
any number of threads and tutorials, including the OpenBSD Sparc64 X11
page.  According to the OpenBSD/Sparc64 page:

  Sun Exper3D, Expert3D-Lite, XVR-500, XVR-600 and XVR-1200 (ifb) -
  24-bit color, accelerated (currently restricted to 8-bit,
  unaccelerated on the XVR-500 and XVR-600, accelerated on the Exper3D,
  Exper3D-Lite and XVR-1200)

Currently did a fresh sparc64 4.9 install. 

OpenBoot output-device screen:r1600x1000x66
[Closest setting to 1680x1050x60 for my Samsung monitor]

Only displays as approximately 1200x1000 with black borders on either
side under OpenBSD w/0 X11, w/ X11, under Ubuntu, and with OpenBoot
test.  Worked great under Solaris with tweaks.

Then attempted to get X Windows working with FVRM, then Gnome.  Without
an /etc/X11/xorg.conf the video output and keyboard just stalls.  Need to
ssh in to reconfigure and reboot.  Xorg.0.log output is the same as for
when DefaultDepth is 8 and Driver is unspecified (see below).

X -configure locks the Blade video & keyboard.  When run from ssh, shows
sunffb, wsfb, and wildcatfb drivers exist but says can't find any device.

Only way to get X windows output is to manually create a xorg.conf with
the wildcatfb driver specified:
Section "Device"
Identifier "Expert3D-lite"
BusID   "PCI:0:1:0"
Driver "wildcatfb"
EndSection
(see below xorg.conf for full configuration)

This leaves me with 8bit unaccelerated video output that is unusable as a
graphic workstation. 

If the driver is left unspecified, wsfb is sourced, but produces an error
in the Xorg.0.log
[with DefaultDepth 8 specified]
[1766211.829] (EE) wsfb(0): wsfb_mmap: Invalid argument

[with DefaultDepth 24 specified]
[1764109.531] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[1764109.531] (WW) Falling back to old probe method for wsfb
[1764109.532] (II) wsfb(0): using default device
[1764109.532] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[1764109.532] (EE) wsfb(0): Driver can't support depth 24
[1764109.532] (II) UnloadModule: "wsfb"
[1764109.532] (EE) Screen(s) found, but none have a usable configuration.

thanks in advance for help with this.

Peter

dmesg, xorg.conf, and Xorg.0.logs:

Sept/14/11@11:15:02 24 bit DefaultDepth w/o Driver specified

xorg.conf has a 24 bit DefaultDepth

dmesg
----------------------
$ dmesg
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. 
http://www.OpenBSD.org

OpenBSD 4.9 (GENERIC.MP) #265: Wed Mar  2 07:25:21 MST 2011
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 2147483648 (2048MB)
avail mem = 2099986432 (2002MB)
mainbus0 at root: SUNW,Sun-Blade-1000 (2 X UltraSPARC-III)
cpu0 at mainbus0: SUNW,UltraSPARC-III (rev 5.4) @ 750 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K
external (512 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-III (rev 5.4) @ 750 MHz
cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K
external (512 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Schizo", version 3, ign 200, bus B 0 to 0
schizo0: dvma map c0000000-ffffffff
pci0 at schizo0
ebus0 at pci0 dev 5 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-1fffff not configured
bbc0 at ebus0 addr 0-fffff: AID 0x00
ppm0 at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607
pcfiic0 at ebus0 addr 2e-2f, 2d-2d ivec 0x23
iic0 at pcfiic0
pcfiic1 at ebus0 addr 30-31 ivec 0x23
iic1 at pcfiic1
admtemp0 at iic1 addr 0x18: max1617
admtemp1 at iic1 addr 0x4c: max1617
tda0 at iic1 addr 0x24
"scm001" at iic1 addr 0x20 not configured
"firei" at iic1 addr 0x30 not configured
beep0 at ebus0 addr 32-37: clock 75MHz
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ivec 0x20 ivec 0x21: nvaddrs 0
audio0 at audioce0
rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287
"gpio" at ebus0 addr 300600-300607 not configured
pmc0 at ebus0 addr 300700-300701
lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ivec 0x1c:
polled
sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
gem0 at pci0 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x21d,
address 08:00:20:fb:25:33
luphy0 at gem0 phy 1: LU6612 10/100 PHY, rev. 1
"Sun FireWire" rev 0x01 at pci0 dev 5 function 2 not configured
ohci0 at pci0 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x21f, version
1.0, legacy support
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x37: ivec
0x218, using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1009> SCSI2
5/cdrom removable
siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x37: ivec
0x219, using 4K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
ifb0 at pci0 dev 1 function 0 "Intergraph Expert3D" rev 0x00
ifb0: Expert3D-Lite (SUNW,375-0116), 1600x1000
wsdisplay0 at ifb0 mux 1: console (std, sun emulation)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
schizo1 at mainbus0: "Schizo", version 3, ign 200, bus A 0 to 0
schizo1: dvma map c0000000-ffffffff
pci1 at schizo1
isp0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204
isp0: board type 2200 rev 0x5, loaded firmware rev 2.2.6
scsibus2 at isp0: 512 targets, WWPN 2100080020fb2533, WWNN
2100080020fb2533
sd0 at scsibus2 targ 0 lun 0: <SEAGATE, ST318452FC, 0005> SCSI3 0/direct
fixed
sd0: 17501MB, 512 bytes/sec, 35843670 sec total
sd1 at scsibus2 targ 1 lun 0: <SEAGATE, ST318452FC, 0005> SCSI3 0/direct
fixed
sd1: 17501MB, 512 bytes/sec, 35843670 sec total
upa0 at mainbus0
"ppm" at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.10/2.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Microsoft Microsoft
3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
bootpath: /pci@8,600000/SUNW,qlc@4,0/fp@0,0/disk@21000004cf6773cf,0
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
syncing disks... done
rebooting

console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. 
http://www.OpenBSD.org

OpenBSD 4.9 (GENERIC.MP) #265: Wed Mar  2 07:25:21 MST 2011
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 2147483648 (2048MB)
avail mem = 2099986432 (2002MB)
mainbus0 at root: SUNW,Sun-Blade-1000 (2 X UltraSPARC-III)
cpu0 at mainbus0: SUNW,UltraSPARC-III (rev 5.4) @ 750 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K
external (512 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-III (rev 5.4) @ 750 MHz
cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K
external (512 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Schizo", version 3, ign 200, bus B 0 to 0
schizo0: dvma map c0000000-ffffffff
pci0 at schizo0
ebus0 at pci0 dev 5 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-1fffff not configured
bbc0 at ebus0 addr 0-fffff: AID 0x00
ppm0 at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607
pcfiic0 at ebus0 addr 2e-2f, 2d-2d ivec 0x23
iic0 at pcfiic0
pcfiic1 at ebus0 addr 30-31 ivec 0x23
iic1 at pcfiic1
admtemp0 at iic1 addr 0x18: max1617
admtemp1 at iic1 addr 0x4c: max1617
tda0 at iic1 addr 0x24
"scm001" at iic1 addr 0x20 not configured
"firei" at iic1 addr 0x30 not configured
beep0 at ebus0 addr 32-37: clock 75MHz
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ivec 0x20 ivec 0x21: nvaddrs 0
audio0 at audioce0
rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287
"gpio" at ebus0 addr 300600-300607 not configured
pmc0 at ebus0 addr 300700-300701
lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ivec 0x1c:
polled
sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1
gem0 at pci0 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x21d,
address 08:00:20:fb:25:33
luphy0 at gem0 phy 1: LU6612 10/100 PHY, rev. 1
"Sun FireWire" rev 0x01 at pci0 dev 5 function 2 not configured
ohci0 at pci0 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x21f, version
1.0, legacy support
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x37: ivec
0x218, using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1009> SCSI2
5/cdrom removable
siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x37: ivec
0x219, using 4K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
ifb0 at pci0 dev 1 function 0 "Intergraph Expert3D" rev 0x00
ifb0: Expert3D-Lite (SUNW,375-0116), 1600x1000
wsdisplay0 at ifb0 mux 1: console (std, sun emulation)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
schizo1 at mainbus0: "Schizo", version 3, ign 200, bus A 0 to 0
schizo1: dvma map c0000000-ffffffff
pci1 at schizo1
isp0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204
isp0: board type 2200 rev 0x5, loaded firmware rev 2.2.6
scsibus2 at isp0: 512 targets, WWPN 2100080020fb2533, WWNN
2100080020fb2533
sd0 at scsibus2 targ 0 lun 0: <SEAGATE, ST318452FC, 0005> SCSI3 0/direct
fixed
sd0: 17501MB, 512 bytes/sec, 35843670 sec total
sd1 at scsibus2 targ 1 lun 0: <SEAGATE, ST318452FC, 0005> SCSI3 0/direct
fixed
sd1: 17501MB, 512 bytes/sec, 35843670 sec total
upa0 at mainbus0
"ppm" at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.10/2.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Microsoft Microsoft
3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
bootpath: /pci@8,600000/SUNW,qlc@4,0/fp@0,0/disk@21000004cf6773cf,0
root on sd0a swap on sd0b dump on sd0b
-----------------------------

/etc/X11/xorg.conf
------------------------
Section "Device"
Identifier "Expert3D-lite"
BusID   "PCI:0:1:0"
#       Driver "wildcatfb"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Sam"
ModelName "SamSyncMaster"
#        Modeline "1600x1000_60.00"  133.14  1600 1704 1872 2144  1000
1001 1004 1035  -HSync +Vsync
#        HorizSync 30.0 - 40.0
#        VertRefresh 43.0 - 75.0
EndSection

Section "Screen"
Identifier "Screen0"
Device  "Expert3D-lite"
Monitor "Monitor0"
DefaultDepth    24
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection

SubSection "Display"
Depth 8
Modes "1600x1000"
EndSubSection
EndSection

-----------------------

/var/log/xorg.0.log
-------------------------
[1764109.448] (--) Using wscons driver
[1764109.467]
X.Org X Server 1.9.3
Release Date: 2010-12-13
[1764109.467] X Protocol Version 11, Revision 0
[1764109.467] Build Operating System: OpenBSD 4.9 sparc64
[1764109.467] Current Operating System: OpenBSD BladeWorkstation.local
4.9 GENERIC.MP#265 sparc64
[1764109.469] Build Date: 01 March 2011  05:17:12PM
[1764109.469] 
[1764109.469] Current version of pixman: 0.20.2
[1764109.469]   Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1764109.469] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1764109.470] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 14
11:15:02 2011
[1764109.471] (==) Using config file: "/etc/X11/xorg.conf"
[1764109.472] (==) No Layout section.  Using the first Screen section.
[1764109.472] (**) |-->Screen "Screen0" (0)
[1764109.472] (**) |   |-->Monitor "Monitor0"
[1764109.473] (**) |   |-->Device "Expert3D-lite"
[1764109.473] (==) Disabling SIGIO handlers for input devices
[1764109.474] (==) Not automatically adding devices
[1764109.474] (==) Not automatically enabling devices
[1764109.474] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[1764109.474] (==) ModulePath set to "/usr/X11R6/lib/modules"
[1764109.474] (==) |-->Input Device "<default pointer>"
[1764109.474] (==) |-->Input Device "<default keyboard>"
[1764109.474] (==) No Layout section. Using the default mouse
configuration.
[1764109.474] (==) No Layout section. Using the default keyboard
configuration.
[1764109.474] (II) Loader magic: 0x4c3210
[1764109.474] (II) Module ABI versions:
[1764109.474]   X.Org ANSI C Emulation: 0.4
[1764109.474]   X.Org Video Driver: 8.0
[1764109.475]   X.Org XInput driver : 11.0
[1764109.475]   X.Org Server Extension : 4.0
[1764109.486] (--) PCI:*(0:0:1:0) 1091:07a0:1091:0140 rev 0, Mem @
0x02000000/33554432, 0x00130000/65536, 0x04000000/8388608, BIOS @
0x????????/262144
[1764109.487] (II) LoadModule: "extmod"
[1764109.489] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[1764109.492] (II) Module extmod: vendor="X.Org Foundation"
[1764109.492]   compiled for 1.9.3, module version = 1.0.0
[1764109.492]   Module class: X.Org Server Extension
[1764109.492]   ABI class: X.Org Server Extension, version 4.0
[1764109.492] (II) Loading extension MIT-SCREEN-SAVER
[1764109.492] (II) Loading extension XFree86-VidModeExtension
[1764109.492] (II) Loading extension XFree86-DGA
[1764109.492] (II) Loading extension DPMS
[1764109.492] (II) Loading extension XVideo
[1764109.492] (II) Loading extension XVideo-MotionCompensation
[1764109.492] (II) Loading extension X-Resource
[1764109.492] (II) LoadModule: "dbe"
[1764109.494] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[1764109.496] (II) Module dbe: vendor="X.Org Foundation"
[1764109.496]   compiled for 1.9.3, module version = 1.0.0
[1764109.496]   Module class: X.Org Server Extension
[1764109.496]   ABI class: X.Org Server Extension, version 4.0
[1764109.496] (II) Loading extension DOUBLE-BUFFER
[1764109.496] (II) LoadModule: "glx"
[1764109.497] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[1764109.500] (II) Module glx: vendor="X.Org Foundation"
[1764109.500]   compiled for 1.9.3, module version = 1.0.0
[1764109.500]   ABI class: X.Org Server Extension, version 4.0
[1764109.501] (==) AIGLX enabled
[1764109.501] (II) Loading extension GLX
[1764109.501] (II) LoadModule: "record"
[1764109.502] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[1764109.504] (II) Module record: vendor="X.Org Foundation"
[1764109.504]   compiled for 1.9.3, module version = 1.13.0
[1764109.504]   Module class: X.Org Server Extension
[1764109.504]   ABI class: X.Org Server Extension, version 4.0
[1764109.505] (II) Loading extension RECORD
[1764109.505] (II) LoadModule: "dri"
[1764109.513] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[1764109.516] (II) Module dri: vendor="X.Org Foundation"
[1764109.516]   compiled for 1.9.3, module version = 1.0.0
[1764109.516]   ABI class: X.Org Server Extension, version 4.0
[1764109.516] (II) Loading extension XFree86-DRI
[1764109.516] (II) LoadModule: "dri2"
[1764109.518] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[1764109.520] (II) Module dri2: vendor="X.Org Foundation"
[1764109.520]   compiled for 1.9.3, module version = 1.2.0
[1764109.520]   ABI class: X.Org Server Extension, version 4.0
[1764109.520] (II) Loading extension DRI2
[1764109.520] (==) Matched wsfb as autoconfigured driver 0
[1764109.520] (==) Assigned the driver to the xf86ConfigLayout
[1764109.520] (II) LoadModule: "wsfb"
[1764109.521] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[1764109.522] (II) Module wsfb: vendor="X.Org Foundation"
[1764109.523]   compiled for 1.9.3, module version = 0.3.0
[1764109.523]   ABI class: X.Org Video Driver, version 8.0
[1764109.523] (II) LoadModule: "mouse"
[1764109.525] (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
[1764109.527] (II) Module mouse: vendor="X.Org Foundation"
[1764109.527]   compiled for 1.9.3, module version = 1.6.0
[1764109.527]   Module class: X.Org XInput Driver
[1764109.527]   ABI class: X.Org XInput driver, version 11.0
[1764109.527] (II) LoadModule: "kbd"
[1764109.529] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[1764109.531] (II) Module kbd: vendor="X.Org Foundation"
[1764109.531]   compiled for 1.9.3, module version = 1.5.0
[1764109.531]   Module class: X.Org XInput Driver
[1764109.531]   ABI class: X.Org XInput driver, version 11.0
[1764109.531] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[1764109.531] (WW) Falling back to old probe method for wsfb
[1764109.532] (II) wsfb(0): using default device
[1764109.532] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[1764109.532] (EE) wsfb(0): Driver can't support depth 24
[1764109.532] (II) UnloadModule: "wsfb"
[1764109.532] (EE) Screen(s) found, but none have a usable configuration.
[1764109.532]
Fatal server error:
[1764109.533] no screens found
[1764109.533]
Please consult the The X.Org Foundation support
at http://wiki.x.org
 for help.
[1764109.533] Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[1764109.533]
----------------------------

Sept/14/11@11:50:04 8 bit DeviceDefault w/o Driver specified
[same issues generated with no xorg.conf]

# cat /var/log/Xorg.0.log
[1766211.738] (--) Using wscons driver
[1766211.757]
X.Org X Server 1.9.3
Release Date: 2010-12-13
[1766211.757] X Protocol Version 11, Revision 0
[1766211.757] Build Operating System: OpenBSD 4.9 sparc64
[1766211.757] Current Operating System: OpenBSD BladeWorkstation.local
4.9 GENERIC.MP#265 sparc64
[1766211.759] Build Date: 01 March 2011  05:17:12PM
[1766211.759] 
[1766211.759] Current version of pixman: 0.20.2
[1766211.759]   Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[1766211.759] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[1766211.760] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 14
11:50:04 2011
[1766211.761] (==) Using config file: "/etc/X11/xorg.conf"
[1766211.762] (==) No Layout section.  Using the first Screen section.
[1766211.762] (**) |-->Screen "Screen0" (0)
[1766211.762] (**) |   |-->Monitor "Monitor0"
[1766211.763] (**) |   |-->Device "Expert3D-lite"
[1766211.764] (==) Disabling SIGIO handlers for input devices
[1766211.764] (==) Not automatically adding devices
[1766211.764] (==) Not automatically enabling devices
[1766211.764] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[1766211.764] (==) ModulePath set to "/usr/X11R6/lib/modules"
[1766211.764] (==) |-->Input Device "<default pointer>"
[1766211.764] (==) |-->Input Device "<default keyboard>"
[1766211.764] (==) No Layout section. Using the default mouse
configuration.
[1766211.764] (==) No Layout section. Using the default keyboard
configuration.
[1766211.764] (II) Loader magic: 0x4c3210
[1766211.764] (II) Module ABI versions:
[1766211.765]   X.Org ANSI C Emulation: 0.4
[1766211.765]   X.Org Video Driver: 8.0
[1766211.765]   X.Org XInput driver : 11.0
[1766211.765]   X.Org Server Extension : 4.0
[1766211.776] (--) PCI:*(0:0:1:0) 1091:07a0:1091:0140 rev 0, Mem @
0x02000000/33554432, 0x00130000/65536, 0x04000000/8388608, BIOS @
0x????????/262144
[1766211.777] (II) LoadModule: "extmod"
[1766211.779] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[1766211.782] (II) Module extmod: vendor="X.Org Foundation"
[1766211.782]   compiled for 1.9.3, module version = 1.0.0
[1766211.782]   Module class: X.Org Server Extension
[1766211.782]   ABI class: X.Org Server Extension, version 4.0
[1766211.782] (II) Loading extension MIT-SCREEN-SAVER
[1766211.782] (II) Loading extension XFree86-VidModeExtension
[1766211.782] (II) Loading extension XFree86-DGA
[1766211.782] (II) Loading extension DPMS
[1766211.782] (II) Loading extension XVideo
[1766211.782] (II) Loading extension XVideo-MotionCompensation
[1766211.782] (II) Loading extension X-Resource
[1766211.782] (II) LoadModule: "dbe"
[1766211.784] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[1766211.786] (II) Module dbe: vendor="X.Org Foundation"
[1766211.786]   compiled for 1.9.3, module version = 1.0.0
[1766211.786]   Module class: X.Org Server Extension
[1766211.786]   ABI class: X.Org Server Extension, version 4.0
[1766211.786] (II) Loading extension DOUBLE-BUFFER
[1766211.786] (II) LoadModule: "glx"
[1766211.787] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[1766211.790] (II) Module glx: vendor="X.Org Foundation"
[1766211.790]   compiled for 1.9.3, module version = 1.0.0
[1766211.790]   ABI class: X.Org Server Extension, version 4.0
[1766211.791] (==) AIGLX enabled
[1766211.791] (II) Loading extension GLX
[1766211.791] (II) LoadModule: "record"
[1766211.793] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[1766211.795] (II) Module record: vendor="X.Org Foundation"
[1766211.795]   compiled for 1.9.3, module version = 1.13.0
[1766211.795]   Module class: X.Org Server Extension
[1766211.795]   ABI class: X.Org Server Extension, version 4.0
[1766211.795] (II) Loading extension RECORD
[1766211.795] (II) LoadModule: "dri"
[1766211.796] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[1766211.799] (II) Module dri: vendor="X.Org Foundation"
[1766211.799]   compiled for 1.9.3, module version = 1.0.0
[1766211.799]   ABI class: X.Org Server Extension, version 4.0
[1766211.799] (II) Loading extension XFree86-DRI
[1766211.799] (II) LoadModule: "dri2"
[1766211.801] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[1766211.803] (II) Module dri2: vendor="X.Org Foundation"
[1766211.803]   compiled for 1.9.3, module version = 1.2.0
[1766211.803]   ABI class: X.Org Server Extension, version 4.0
[1766211.803] (II) Loading extension DRI2
[1766211.803] (==) Matched wsfb as autoconfigured driver 0
[1766211.803] (==) Assigned the driver to the xf86ConfigLayout
[1766211.804] (II) LoadModule: "wsfb"
[1766211.805] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[1766211.806] (II) Module wsfb: vendor="X.Org Foundation"
[1766211.806]   compiled for 1.9.3, module version = 0.3.0
[1766211.806]   ABI class: X.Org Video Driver, version 8.0
[1766211.806] (II) LoadModule: "mouse"
[1766211.809] (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
[1766211.810] (II) Module mouse: vendor="X.Org Foundation"
[1766211.810]   compiled for 1.9.3, module version = 1.6.0
[1766211.810]   Module class: X.Org XInput Driver
[1766211.810]   ABI class: X.Org XInput driver, version 11.0
[1766211.810] (II) LoadModule: "kbd"
[1766211.813] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[1766211.814] (II) Module kbd: vendor="X.Org Foundation"
[1766211.814]   compiled for 1.9.3, module version = 1.5.0
[1766211.814]   Module class: X.Org XInput Driver
[1766211.814]   ABI class: X.Org XInput driver, version 11.0
[1766211.814] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[1766211.814] (WW) Falling back to old probe method for wsfb
[1766211.815] (II) wsfb(0): using default device
[1766211.815] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[1766211.816] (**) wsfb(0): Depth 8, (--) framebuffer bpp 8
[1766211.816] (==) wsfb(0): Default visual is PseudoColor
[1766211.816] (==) wsfb(0): Using gamma correction (1.0, 1.0, 1.0)
[1766211.816] (II) wsfb(0): Vidmem: 2000k
[1766211.816] (==) wsfb(0): DPI set to (96, 96)
[1766211.816] (**) wsfb(0): Using "Shadow Framebuffer"
[1766211.816] (II) Loading sub module "shadow"
[1766211.817] (II) LoadModule: "shadow"
[1766211.820] (II) Loading /usr/X11R6/lib/modules/libshadow.so
[1766211.822] (II) Module shadow: vendor="X.Org Foundation"
[1766211.822]   compiled for 1.9.3, module version = 1.1.0
[1766211.822]   ABI class: X.Org ANSI C Emulation, version 0.4
[1766211.822] (II) Loading sub module "fb"
[1766211.822] (II) LoadModule: "fb"
[1766211.825] (II) Loading /usr/X11R6/lib/modules/libfb.so
[1766211.828] (II) Module fb: vendor="X.Org Foundation"
[1766211.828]   compiled for 1.9.3, module version = 1.0.0
[1766211.828]   ABI class: X.Org ANSI C Emulation, version 0.4
[1766211.829] (EE) wsfb(0): wsfb_mmap: Invalid argument
[1766211.829]
Fatal server error:
[1766211.829] AddScreen/ScreenInit failed for driver 0
[1766211.829]
[1766211.829]
Please consult the The X.Org Foundation support
at http://wiki.x.org
 for help.
[1766211.829] Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[1766211.829]

Reply via email to